Search results for query: *

Wondered if any of you have experienced this. In crawling traffic my car (69 Coronet 383/727) has a clunk that sounds something like a wheel weight hitting as it goes round. Its either not as audible or doesn't happen (I think it does but my car is loud) while rolling, but I think its much...

Hi all, I upgraded to discs on my 69 Coronet using a kit with wilwood calipers, a bendix booster and master and oe style master cylinder from Cass. Kit works great, but I've an odd leakage problem from the master cylinder cap - wondered if any of you had experienced it? If I start with a...

Quick query. Without a booster will a standard manual master cylinder (1") allow me to stop the car with 2.94" diameter disc brake pistons (recon GM FRC4417). Brakes are OK at the moment with drums but my wheel bearing has spun in the hub so seems like I may as well just fit the disc kit if it...

Just in the final stages of refitting my engine. Coupling up the coolant lines to the rad and the trans I have had to reuse some brass reducing adapters to fit the ally lines I have. The adapters were in both the trans and the radiator (I have fitted a new trans and rad). My car is a bit of a...

I've used the search function and while I find loads of references to the seal everyone seems to know the answer to my question so its never posed or answered. I'm fitting a new/old trans to my car to replace one with a cracked casing round the starter motor. New trans has been rebuilt but has...

Replacing the starter motor has morphed into a project beyond anything I anticipated. I'm now installing a Borgeson as the motor is out and it seemed like a good idea. Having removed the original coupler I have been able to compare the column with the Borgeson coupler - the black dot on the...

Hi All, I've got the engine out of my 1969 SuperBee tribute at the moment and am cleaning up the engine bay. At the back of the bay above the frame on either side there are some holes. One side has some type of guard 'pinned' over it and the other is open, clearly the 'guard' has gone. I...

I'm looking for advice. My radiator has an unrepairable top tank so I've been looking for a new one. The current one is a Chrysler but is non stock, its much taller and the lower hose is on the passenger side. The pipe as been cut for it to fit, along with the lower radiator support flange. I...

I see similar threads but wanted opinions. I have manual drum/drum brakes on my Coronet. This was originally a 318 but was upgraded to a 383 with performance parts but not the brakes. It had a long weekend driving for 3 days solid at an event this weekend just gone and the brakes were...

Hello all, beginners question again. My Coronet Super Bee Clone has one leak I cannot get to the bottom of. The PS pump is leaking fluid from the cap, I have replaced the cap seal as it had two under there when I got the car, obviously someone else spotted an issue. I don't think there is air in...

I cleaned my 'tribute' Bee the other day. Hosed it off, washed it and then rinsed it with the hose again. Check for leaks to discover water pooling on the carpet directly below the door hinges on both sides. Water seems to run down the roof channeling into the gap between the door and the front...

Hello all, just saying hi. I was looking for a classic American car with space for the family but didn't really know what I wanted. When a 69 Coronet appeared local to me I jumped at it and am now learning about what I've bought - yes, I know I got it all wrong. I have a car that left the...