Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I think the initial high current draw is likely the result of a "less than new" battery and a "high output" alternator. After starting your RR the battery is a little depleted and the fact that the current goes down reasonable soon indicates that the charging system is working as it should. I...
I have never had a problem with a broken spring but I put a dual spring on my 73 Dodge B100 with Edelbrock carb & intake, looks kida cool with additional benefits of safety.
I purchased a few Craftsman 5pc Mini Plier Sets about 15 years ago, recently I found one of the wire cutter pliers laying on the bench broken, I took the entire set back to ACE and got a replacement set, after I inspected the replacement pliers I went back to ACE and got my old set back, the...
I also used retrofit kits, the result was GREAT! Easy and quick to install
This kit uses magnetic LED strips which attach to the metal housing of the old florescent fixture.
"50W LED Magnetic Strip Troffer Retrofit Kit - 2x4 Troffer - 5600 Lumens - Dimmable" available in different temperatures
This concept is what I and my buddies have talked about for many years.
Not sure if it's a good thing or not but our wife's usually bring us back to reality pretty quickly.
I have read most all posts on this site that have the words “torque converter” in them, I have learned a lot, enough to realize I need some advice.
Another mess I have created…
I have been fighting a drive line vibration for about 2,000 miles; I have had the drive shaft rebuilt & balanced...
Just an FYI...
Many years ago I troubleshot similar symptoms, determined the rotor was warped and had them turned, this fixed the problem for a while but when the rotor was warped it overheated in one specific spot, this caused the metal to get harder than the rest of the rotor, so as it...
On my 73 B-100 Van I have successfully solved a "fluctuating amp meter" problem by replacing the voltage regulator although the last time I got a "fluctuating amp meter" I swapped out the regulator and it did not fix the problem. I eventually replaced the main charge wire(s) (drilled holes in...
Same Problem on my 73 B-100 Van with Edelbrock 1405 carb. After pulling the van into the garage on a hot (80+ deg) day the fuel would boil and the garage smelled like I pored gas all over the floor. After installing a 1" Phenolic plastic spacer (Edelbrock 8711) the gas smell problem went away...
I wish this was my biggest issue with maintaining my Van, hoping someone will have an idea where to buy a replacement part as I cant fins anything on the web.
Recently I serviced the Door linkage rods on my 73 Dodge B100 Van and found that the E-Clip was broken. I replaced it with a factory clip...