Search results for query: *

Another LAFD Crown built back in the day…..

If it helps, old photo depicting the lining length measurements and off-set lining placement of my original front shoes-69 RR……

Dadsbee’s suggestion is a good one. Done that, works great. Also, I picked up one of these awhile back, used for a couple bucks. Fits nicely into that tight angled spot…..jim

If it helps, this is the measurement off my 69RR, original manual drum master & rod….7 1/2” from floorboard (no insulation or carpet thickness) to bottom of pedal pad. If u need anything else let me know….I enjoy following your posts….jim

Ya…..I think they made him a staff member too…..

Thanks Ed…..that’s a prayer from the heart…..Happy Thanksgiving

Nothing special, but allowed easy access to all sides for prep & primer………

On my ‘69, that hole is for the left side heater box stud mount……

If it helps, this is the glove box catch from my ‘69RR non-rally dash…….

Been helped many times by others with stuff like this on the forum. Hope this helps you. These are the nozzles & clips from my 69RR. They attach with (7) #10-14x .50 lg pan head Phillips screws. If I recall correctly, the original rubber hoses are ribbed on one half side & are two different...

The Lone Ranger Rescue 8 Sky King Combat Rat Patrol Adam 12 Dragnet The Sopranos All in the Family Blue Bloods Longmire The Terminal List Roadkill Garage

Enjoy following your build. Don’t know how bad your switch plates are, but the chrome on mine was pretty bad. They were discolored & even appeared pitted. I used some windex with a toothbrush, then some diluted “Dawn’” with a piece of clay bar, followed by some plastic polish.

A couple of months ago, I sought out Nacho via a PM regarding a dash wiring harness issue. He walked me through it over a several day period. I greatly appreciated his help & willingness to share his knowledge……..

Thanks for the info & taking the time to get back to me. I’m hoping to find the original stuff if possible. I’ve spent a couple hours going through my stuff, but can’t find them…..jim

Still looking……..

Enjoyed the video. If u r changing the cluster, and don’t need to reuse the below screws, I’d be interested in buying them from you….. 1-The original 9-screws that attach the plastic rectangular chrome bezel to the gauge cluster. 2-The original 3-screws under the dash switch panel that attach...

69RR-standard dash-WTB the following….. 1-The 9-screws that attach the plastic rectangular chrome bezel to the gauge cluster. 2-The clips that hold the dash defroster vent & heater box outlet hoses in place…need 5. 3-The 3-screws under the dash switch panel that attach the lower dash pad to...