Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I removed vacuum advance line and plugged it.
Drove car no help!!
Reattached vacuum line and adjusted both idle mixture screws and seemed to help a little.
Driving at 40/50 mph I’m getting intermediate vibration/surge.
Driving me crazy
Thank you all for the great info.
I’ll try the idle mixture first and then plug the vacuum tomorrow.
1.Quick Fuel Slayer 750CFM.
2.Mopar electronic conversion w/ Mopar controller.
3.Good 93 octane no ethanol.
4.Coil for resistor
5.Timing at idle vacuum disconnected is 8/10 BTDC I believe.
Hi,
Engine surges at cruise??
It doesn’t appear to surge accelerating or with a load on it but cruising down the road you definitely feel it.
Don’t have history of the engine but fuel system is all replaced except for fuel cap.
New plugs, plug wires, distributor cap, rotor and electronic pick up...
Hi,
Driving below 2000 rpm everything is normal.
Above 2000 rpm get a loud squeal that sounds like coming from under hood.
During squeal if let up on accelerator and rpm goes below 2000 rpm squeal stops. Accelerate above 2000 squeal starts and below it stops?????
Bearing in alternator or power...
Anybody use marine 2 cycle oil TCW3 in their fuel??
I read that it’s great 1 oz to 5 gal of gas.
I’ll try in my 440 RB HP and see if any difference.
Will advise.