Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Curious, as what I remember hearing before, are things like the dash and other non-body panel related electronics compatible between a 71 charger with a 71 Coronet? I was always told the coronet is just the non-performance (and in the early 70's, the 4 door version) of the charger?
Hey guys,
Picked up a 4 door coronet that needs some love. Needing the following:
Driver side front and rear door glass (Most important)
Back window
overflow bottle
driver fender trim (both wheel and body trim)
trunk lock with key
front hood emblems
fender emblems
So, I recently picked up a used woodgrain 70 wheel and tried to put it on. The gear for the inner column is smaller on my 1970 column. I assume I have a 68/69 inner shaft inside my 70 column? Is there an adapter I need to make this work? Or, is the only option I have to find the correct...
Hey, I’m running a custom brake setup and I’m needing some advice on which valves I’m needing to put in line to make sure it works properly. I’m running disc brakes both front and rear and a Wilwood master cylinder. It also came with a proportioning valve. Am I needing any additional valves to...
I have an AC heater box that I was going to rebuild, but don’t have the time. So, before I start pulling the trigger on finding one already done, am I able to run an A/C box without running AC? I have the outer vents, just not sure if it’s going to be an issue.
also, is there any members or...
For a 70 charger, Anyone have the opening measurements for a core support (lengths and heights) and dimension from corner to corner for the opening? I’ll need to see how big of pusher fans I can run. It’ll be a 26” opening.
Anyone have any tips or tricks on getting the radiator to move in front of the core support? What modifications or radiator did you use to make it less painful?
I only have around 4" of space between the core support and the blower belt. I was going to run a 3 core double pass radiator from...
Made a video of the work I knocked out to free up some space in my shop.
Made a few cabinets out of old railroad boxes, added a newer fridge, work table and a few other things! Let me know what ya'll think!
Needing to find the correct pitman arm for my setup. Given theres a lot of different styles, I was wondering if anyone knew which one I should be looking at.
I have a 1970 Charger (440 car) with a Borgeson Power Steering kit ( https://www.jegs.com/i/Borgeson/153/999065/10002/-1 ), Hooker 1 3/4"...
I'm looking for a fiberglass option for a 1970 charger trunk lid, but am seeing places post them for 68/69's, not 70's. I wasn't aware of any difference in the 3 years, am I missing something?
Going to be running some fuel line here soon and need some input on the size needed.
I'm running a GPA-9 Pump from tanks inc to a dual Fitech. Ill have a fuel regulator between them to ensure the Fitech is staying within the needed pressure (40 psi if I remember correctly). Motor is a 440...
I have a 1970 Charger RT that I'm looking to get some 15" rims (to clear 4 piston Wilwood brakes). Is this the clearance I'm needing for the backspacing and offset to have these line up and look good? Not trying to get these to stick outside of the fender...
Also, If I was to go with an 8"...
Starting to price out an in-tank setup for the 1200+hp dual fitech I'm running. Going through tanks inc, placed what I thought I'd need. I know I need to run a relay as well (not sure which one), but, what else am I missing?
Also, would I need to run an external regulator before it hits the...
Looking to place an order soon for a American Autowire kit through p-s-t.
https://p-s-t.com/i-23161994-wiring-harness.html#!year%3D1970%7C%7Cmake%3DDODGE%7C%7Cmodel%3DCHARGER%20R%2FT
What else would you guys recommend I pick up? Other than a decent wire splitter/crimper and volt meter, I have...
Hey guys!
Since everyone wants pictures, I can do better. Here's videos instead!
https://www.youtube.com/channel/UCtaT7WX_DFxgwpHfR7zBMHA?view_as=subscriber
Figure I'd start a thread to show the progress on my 1970 Charger R/T. The car had seen a pretty rough life up until I was able to...
Just finished rebuilding my steering column for the 1970 Charger. Figure if any one is looking to do it as well, you can see what it entails! I try to do these videos to help anyone else who might be trying to tackle the same projects that I am! I'm sure I might need to swap something...
I'm building a 70 R/T Charger to be setup with a 440 and 8-71 SC. Its currently dropped in the car, but, as of now I am clueless on the direction I need to go from here. Looking to run a FiTech 2x4 (1200hp) setup. Although I'm thinking I'd be closer to around 800 HP, I'd rather have more...
I'm building a 70 R/T Charger to be setup with a 440 and 8-71 SC. Its currently dropped in the car, but, as of now I am clueless on the direction I need to go from here. Looking to run a FiTech 2x4 (1200hp) setup. Although I'm thinking I'd be closer to around 800 HP, I'd rather have more...
Im in the process of putting together a 1970 Charger R/T with a 440 that was left for dead and was going to be crushed. It was pretty badly stripped of anything of value. During this I obviously came across a lot of issues with parts I don't know I need yet. I will keep this thread updated...