• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  • Users: Bigtime
  • Content: Threads
  • Order by date
  1. Bigtime

    Correct Interior?

    Hello to all! I bought my '65 Coronet 500 about 4 years ago. The pictures show the interior that came in it and is still in the car. The question is: Is this a factory interior? I don't particularly care for it [I like vinyl interiors] but I am curious about it. Any information would be helpful...
  2. Bigtime

    451 or 496 Stroker?

    Hello to All, I am contemplating the replacement of the 383 in my Dodge with a professionally built 451 or a 496 stroker engine. I would like your opinion of these engines, your good or bad experiences, advise which of the two that you prefer & why, etc. Just any comments that you'd like to make...
  3. Bigtime

    Engine Boss Location on a 383

    Hello, Can somebody post a CLEAR photo for me of the engine boss on a 383. I know it's located close to the distributor but I've forgotten where. Help an old-timer out, please. Thanks!
  4. Bigtime

    How will it work?

    Hello, I recently bought an Offenhauser 360* intake identical to the one shown here. The application is my '65 Coronet 383 [out .030]/727/3.23 [for now] rear gear. A 4.10 gear is planned for the near future. The engine has a slightly lumpy [no cam card, bought it this way], has headman headers...
  5. Bigtime

    For Peace of Mind

    My '65 Dodge Coronet 500 has a single master cylinder at present. I want to/need to convert it to a dual master cylinder setup and want to use all NEW parts. No trips to the junkyard. Who manufactures a kit to convert from single to dual master cylinder brakes? Thanks!
  6. Bigtime

    I Need A JURY!

    Hello, I am going to put REAL electronic ignition system in/on the 383 in my '65 Dodge Coronet 500. Right now I have a Pertronix module inside the distributor. I bought a Proform distributor kit, part # 440/427. I have also bought an MSD Street Fighter box w/rev limiter, part # 5520. An MSD...
  7. Bigtime

    Gated Shifter?

    I am looking for a gated type shifter that [when stripped from its factory plastic console] will fit into/under the factory console of my 1965 Dodge Coronet 500. I just want to feel a positive stop between shifts. I also want the appearance of a factory shifter arm/knob. I am just doing...
  8. Bigtime

    '65 Coronet Disc Brakes

    Hello, I'm looking for a reasonably priced complete front power disc brake kit for my '65 Dodge Coronet. I want to convert from drum to disc. Your suggestions will be appreciated. I am looking for a new kit.....not a combination of salvage yard parts. Thanks as always, Steve
  9. Bigtime

    Dual Quads On My 383?

    Hello, I really want to put a dual quad set up on my '65 Coronet. I want to do it with progressive linkage, and the set up is basically for show, not go. My Dodge has a healthy 383 in it....a decent "lumpy" cam [no cam card], 906 heads, Hedman headers, with a console shifted 727, and a 4.10...
  10. Bigtime

    My '65 Dodge Console

    Hello, I was wondering if anyone has ever swapped out the '65 OEM automatic shifter for an aftermarket shifter? I want to retain the console and factory appearance. I realize this was an odd year for Chrysler.....it was the first year after the push button was eliminated. If someone has, what...
  11. Bigtime

    Small Yoke vs. Large Yoke Measurement

    Hello All! Does anyone out there have a clear photo or drawing that shows me exactly how to measure these two pinion gear yokes? If not, can someone refer me to a link that shows me how to measure them? I searched the forms first and could not come up with anything.....perhaps I overlooked a...
  12. Bigtime

    Goofy Question #99!

    Hello to all! Ok, here we go..... I have a '65 Dodge Coronet 500 with a 383. I plan to buy a set of uncut Taylor wires that I will cut to fit. I want to route the wires away from the valve covers.....down along the sides of the inner fender wells. I should mention at this point that the car is...
  13. Bigtime

    Pistol Grip handle for 727?

    Hello All, I have a 1965 Dodge Coronet with a console shifted 727. Can I convert the existing black knob to a pistol grip-type handle? If I can, can any of you folks direct me to a site where I can buy one? Another question: Does my existing black knob just screw off? I tried it once and the...
  14. Bigtime

    Intake manifold question/comparison

    The application is my '65 Dodge Coronet 383/727, and [soon to be] 4.11 rear. -Has anyone had experience with the Weiand Action Plus manifold, part. # 8008]?...I am wondering about low end torque and throttle response. -Can anyone offer a comparison between this manifold and the [now...
  15. Bigtime

    FOUND Edelbrock DP4B

    Looking for a reasonably priced Edelbrock DP4B for my 383. Please let me know what you have. I have a Torker for a B 383 engine that I can use as a partial trade [Torker + cash] for the DP4B intake if you are interested. If not I will buy the intake out right. UPDATE: I found the intake. Thanks...
  16. Bigtime

    600 or 750 CFM?

    Just looking for opinions.... I have a 383/727/3:23 in a '65 Dodge Coronet 500. The engine has a mild cam, headers, an Edelbrock Tarantula TM6 and [at present] a 600 CFM Edelbrock carb. It also has a standard Pertronix conversion. I was thinking of swapping out the carb for a 750 CFM. The...
  17. Bigtime

    Chrysler Mystery [?] Intake

    I posted a question about this yesterday but thought I'd add photos. This aluminum intake has a Chrysler part # 2836148. Does anyone know anything about it? Thanks
  18. Bigtime

    Chrysler intake...Pt. # 2836148??

    Hello... I am [possibly] looking to buy an aluminum intake with a Chrysler part # 2836148. -Can anyone give me any history on it? -Works well or not so well? -What was it originally installed on from the factory?...I believe it does fit "B" engines....or does it? -What RPM range does it...
  19. Bigtime

    A good Idea!

    To my FBBO friends, Thanks for all your help with my questions this year! Pass this one on to your racer friends & have a Merry Christmas! Steve
  20. Bigtime

    Items for sale posts

    I have been looking off and on for a sure grip center section for my car. I've contacted a couple of sellers without first checking the listing date [my fault] only to find out that the item is LONG gone. I would suggest that "For Sale" or "WTB" ads have an automatic expiration date [30 days...
Back
Top