Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Schumacher Poly-loc Motor Mounts
Brand New in box
B1E-62-65B
Fits 62 to 65 B body
Out of stock at Schumacher and have been for a while
$150 USD Shipped USPS
Hi all. I haven't been down the track with a door car in 30 years and it's been almost 20 years since my dragster days.
Tomorrow I'm taking the 62 Dart to the track. It's ready for tech but I'm not sure about some of the prep stuff.
New 29.5x9 slicks on an 8" rim, What pressure to start with...
Can anyone tell me about this manifold. It's a RB manifold like the 62 300h casting #2264877 but it has a date code 7/9/5 (Sept 7th 65)??? It also has WMC in a diamond outline as a logo, I don't know what the WMC stands for either. Any help would be great. Thanks
The 1962 Dodge Dart, is the only year that Dart was built on a B-body platform.
Unless you had the luxury of getting a factory sponsored, race car like the Ramchargers, this is likely where you had to start.
This car was built as a tribute to those who had to do it, the hard way.
Originally...
I picked up a T bar from an another distributor and am looking at shortening the slots.
This T bar came from a small block distributor, I think???
There is an identification mark on the top side that says R17 and a mark on the bottom that says L17.
As you can see the advance slots are on an...
Does anyone out there have access to the Max Wedge Serial Number Book for 1962? or the 1962 Dodge Ram Charger Guide both by Darrell Davis. I've checked a few places and they are not available. I'm interested in production numbers for a 62 Dart, 2 dr sedan, MW, with a standard transmission. If...
Does anyone out there have access to this book for 1962? I've checked a few places and they are not available. I'm interested in production numbers for a 62 Dart, 2 dr sedan, MW, with a standard transmission. If someone can post that info for me, I'd really appreciate it. Thanks
Here is what I came up with for the exhaust on the '62.
Reminicent of the max wedge exhaust without the reversion caused by joining the muffler pipes so far down the 3" primaries.
3" stainless primaries and 2-1/2" stainless for the rest of the system.
Mandrel bent elbows, cut , fit, and tig...
I'm looking at an Innovate Motorsports 3918 MTX Series MTX-L Plus Wideband Gauge for tuning the max wedge carbs. Has anyone used it or other Innovate products? What are you thoughts?
Thanks, Mark
I can't find any info on setting the bearing preload on a Dana 60 rear axle, for a car.
What is the procedure to set the adjuster for the tapered bearings?
Thanks all and Happy New year to everyone here.
Mark
I spoke with Jim, the owner of Detroit Muscle, about body gaskets for the '62 Dart.
He had everything I needed, in stock, and shipped it out right away.
I asked about a FBBO discount and he took 10% off the order.
The gaskets arrived and fit perfectly and match the original material used by the...
I'm trying to hook up the vacuum lines to the heater box vacuum actuators and I'm not sure which color hose goes to the rod end of the actuator . The hoses are color coded, one has a white stripe and the other has a red stripe.
Can someone give me the measurements for the front seat, backs for a 60/40 split bench.
I need to modify a 50/50 split bench seat to the 60/40ish combo for my Dart and I have no idea what size they are supposed to be.
Thanks, Mark
1962 Dodge Dart trim.
Pictures are from the internet, I used them for reference.
I need the long trim piece that runs down the drivers side front fender.
The 2 short spears that conyinue frome the tail lights but attach to the trunk.
I also need a piece for the grille surround. It's the...