Search results for query: *

Hey guys. Anyone have any good shots (or measurments for that matter) of 66-70 b-body speedo cable bracket on drivers floor bottom, and interior floor harness cover locations? I have nothing to reference, and I seem to be finding everything but on my google search. Even trying non-related...

Can anyone tell me the username of the owner of Superformance Gaskets? He had chimed in on a few threads regarding oil pan sealing and the use of his gaskets. I have tried every search I can think of, and I'm failing miserably trying to find it. Thanks guys.

So the original set of rockers and shafts on this 440 were in tough shape. Some bent pushrods, lots of scoring and some peening on valve stem end. Just a good idea to replace. MP HD rockers gone the way of the dodo, and Sealed Power ones back-ordered, and according to them, about to be phased...

Hey guys. Anyone have a 440 block on the shelf they could give me some head bolt hole depths on? Bolting on some new 440Source stealth heads today, and 3 or 4 of the short head bolts have actually stretched on me before they reached the instructed torque of 70 lb.ft. I'm using 30 weight oil, and...

Just pulled in my buddy's Lynch Rd. 68 GTX. Cars been sitting since 1981, belonged to his dad. Started teardown today, and noticed the pass side of the rad support was all hacked up, and weld nuts were missing for radiator mounting. Top was nut and bolted, not attached at bottom, driver side is...

Had to cut into my dash harness today to fix the blue ignition run feed wire from the ignition switch. I was doing some other work to the dash when I happened to see the melted wire. Strange, as the car starts, runs, charges and drives with no issues, and can find absolutey no other damage...

Looking for some input from the guys who have been there. I replaced the floors in my gtx years ago, when I was learning to weld, and all that were available were the left and right partial repair sections. Now looking at my old repair, I realize I could have done a MUCH better job with fitment...

Does anyone have a manual brake pushrod for a 66-70 b-body sitting on the shelf that they could measure the length of for me? Really need from the master cylinder tip, to the center of the hole for the pedal, not overall length. Thanks everybody in advance.

Just want to say thanks again to Larry at Sled City Fiberglass for an exceptionally well made bolt-on RO23 scoop for my 67 GTX. Not only is it built like a brick shithouse, but a quick initial fit up to the hood shows a great fit right out of the box. And it's not a wavy piece of crap either, as...

hopefully someone has been down this road and can give me a little guidance. 67 gtx, headlights will flicker after about 20 minutes of operation, and will eventually just fail after about 2 minutes of that. the car did this 18 years ago when i first got it, so i replaced the h/lamp switch and...

i've been running the mp .590 solid lifter cam in my 440 for a while. it's always been pretty noisy, and thats the nature of the beast, but now it's starting to bug me. the cold lash spec for this cam is .028/.032 int/exh., but that seems pretty loose and even by the time it warms up, it still...

What do you guys know about a company called "One More Run"? They were located in Knoxville Tennessee, and reproduced tail light lenses for 1st generation Chargers and GTX's in the late nineties. Did anyone else out there use their products or have knowledge of the quality of their products? I...

any other musicians out there? i've been playing drums for about 19 years. drums in the winter, my GTX in the summer. it's tough in the northeast without a garage!

just replaced my single post neutral safety switch with a 3-prong switch and wiring from napa. i did this so my back up lights could work with my b&m floor shifter, as my factory reverse light switch is operated by the steering column linkage. it bolted right in, i rerouted the wires for the...