Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I know Mopar doesn't make them anymore, but what part number would be on the seal or box if NOS? I have seen two part numbers mentioned. Not sure where to look this up. Thanks.
Posting for a friend. Looking for a CSR 836 big block shield. My friend has a 63 Ply that his buddy drives as he has lost his eyesight. Longtime Mopar guy. He is concerned about safety, but CSR is not supplying any new shields right now. So looking for a used one. Told him I would keep looking...
Wiper motor from my 63 Plymouth. Took this out many years ago as not needed. I also have the wiper motor switch. It worked when I took it out, I think it's a two speed, but can't recall right now. $40 plus freight.
Is there a measurement or a way to determine if my 63 Ply has the correct K member? I have a CSR transmission shield for my big block I want to use now. I know the "trick" years ago was to put a newer year K member in to move the motor back. I am not sure if the previous owner may have done...
Was on Class Racer forum and found it interesting all the negative comments about CSR Performance. I am still waiting for any word from them about my transmission shield ordered in February. No reply on emails sent since July, and last time I called was told "Kim will call you back". Of course...
I have 2 starters for sale. I did bench test them with a battery and both turned over and the starter drive worked. One is a 3755258 with a 62 date code, the other is a 2095219 with a 76 date code. $60 each plus freight. Zip code 55033.
I am in the same position as the rest of the country waiting for CSR to to make a shield for my 727. My order was at the end of January. CSR doesn't give any idea as to when it may be made. It seems nobody makes a blanket for a 727, but reading some posts where racers have done some work on...
These are 3/8" Trend pushrods, .080 wall, ball & ball end, with oil hole. These were sold through JPW but were bought from Trend. JPW # PR3-9250. Changed camshaft so no longer need them. $75 plus freight. Length is 9.250.
I had a hard time locating anyone that had or could produce a set of .904 tool steel, flat tappet, DLC coated lifters. Trend said probably by July and $2500. Comp Cams said Trend makes lifters for them so any ship date shown will be kicked down the road ($1800). So I was told to check with...
Asking for a friend. Is it possible to bore a 413 industrial block to make a 426 cu in ? He has an industrial block and asks if that is possible. Not sure if it makes the block too thin. Maybe somebody has had some experience with that situation. Thanks.
Looking for a set of 2406518 or 518M heads. They would need to be good enough for NHRA stock eliminator. I know these are quite rare now and hard to find, but one never knows what is out there.
My 63 Plymouth has a small brake pedal. Mine is an automatic trans so want to put the auto trans wider brake pedal in. Just need the pedal but wondering if I am restricted to 63 to 65 B body cars or if some other years may fit.
Brainerd Raceway in Minnesota will only have eighth mile races for the rest of the year. Not able to prep the track for quarter mile racing. Big problem everywhere it seems. Not sure about Rock Falls in Wisconsin.
Started researching fuel jug holders and don't seem to find many bargains. I am going to use 2 single holders, one for each side of the trailer. Was surprised to see that even the plastic ones are almost $60 each. Not sure if anyone offers better prices than I am seeing. Have many things I need...
My car is in storage 2 hours away so thought I would ask. What is the bolt size on my 63 Ply wagon where the original seat belts bolt to the floor. Maybe 1/2 in x 20 or different? Want to get some eye bolts so I can mount the lap belts from my Simpson harness. Car has sat for so long I lost the...
My old truck is about done. So thinking of buying a used motorhome to pull my 24' enclosed trailer. Not a diesel fan so maybe something with an 8.1 Chev. Here good and bad about using a motorhome to pull a heavy trailer. Trying to do this on a reasonable budget, so compounds the issue. I have...
Have a friend who doesn't use the computer much. Told him I would research the MSD 7530 module for him as he has a bad module. Sure don't see anything used anywhere. I suppose I can try the WTB forum, but not looking for much success. Just started looking, so need to expand my search.