Search results for query: *

Unsure of year but covers slant six to 413 engines, I believe it covers d100 up to motor home $40 buyer pays shipping from 53007

1968 RR exhaust tip, taken off car when almost new, slight stain on bottom. This is NOT a reproduction! Only one available. $40 plus shipping.

Lathe collet 1/2 inch work diameter --- must have number 2 or 2A stamped on body--for older South Bend lathe . Thank you Bill76

Have 68 hemi road runner chrome exhaust pipe tip , I removed all exhaust when the car was new to go drag racing tossed every thing but the chrome tips . Can anyone tell me the OD of the hemi tail pipe were the same as the 383 . The reason I ask is I may want to sell them and I don't want to...

699 oil pan and pick up .Has light dings and dents ( camera flash makes them look worse then they are) I assume the pick up is correct as pick up and pan came off same engine. $65 plus shipping from 53007

New never used snap on bar set , complete nothing missing or scratched , box has slight dent in cardboard $45

4 like new synchronizer stop rings , $20 plus shipping from 53007

Digging around in my stash of take off parts I found a nice AFB carb I doubt has ever been apart. The tag says 4327S and the carb body reads 43276 My question is why would the last digit be different from the tag and the body Build date is L-6 which I assume is December 1966 if that means...

My tranny case has a very small leak in the bottom of the case (like 3 drops a day) The leak is in the cast iron I am positive about this. I called Brewers about this and he said it was probably porosity in the case and to seal it up from the inside and he has seen it before. My question is what...

need 2 complete manual brake adjuster kits for 67 coronet , 8 3/4 rear axle with 2 1/2 by 10 drums.Can be new or used as long as there is a right and left complete adjusters Thank you Bill76

Looking to put wilwood disc brakes on front of 67 R/t problem is wilwood teck does not know if they will clear front sway bar and he wasn't sure if they could be mounted to face rear of spindle. Brakes in question part number 140-11020 11 inch rotor , 4 piston caliper I really want to use...

Does anyone know the brake pedal ratio on 67 dodge r/t with manual brakes and trans. Need to know before I order master cylinder. Thanks in advance Bill76

I want to upgrade front suspension on my 67 coronet r/t to get it to handle better and a stiffer ride. Please don't flame me for not using search feature but I am computer challenged. My plan is rebuild lower control arms with stiffing plates and new bushings-- do I want poly or rubber bushing...

Need right and left hand manual brake adjusters for 10 x 2 1/2 rear drums . need adjusters and springs . Not sure of year of rear end , setting under 69 coronet right now

I need new front 11"X3" drums for 67 coronet r/t , Chrysler parts book says coronet-charger-belvedere- satellite are the same part number . Ok that makes sense to me but I only have a 67 parts book and need to know if newer 68-69-70 ect drums are the same , I would think mopar used the same...

Two new in box Moog k722 upper ball joints , Boxes are marked Made in USA $20 plus the ride. I went with tubular control arms instead , have no use for them. Will try to post pictures when I can figure out how

need help with oil pan and pick up -- 440 engine what I got is a #699 oil pan and melling 63-se pick tube --well the pick up tube is to long by about 1/2 inch. Is this the wrong pan for this car? the old pick up is full of debris (rod bearing spun) can anyone tell me what pan and pick will fit...

Looking for new clutch setup for67 rt , had center force dual friction , broke it in for 500 miles and first hole shot with street tires the only smoke was from clutch WTF. Yes it was adjusted according to the 15 year old whom answered the tech line, needless to say this piece of crap is getting...

Were max wedge rods anything special ? I ran an ad on craplist and a guy called me to sell max wedge rods I told him I just bought a new set of rods and didn't any more. well about 60 seconds later I thought they might be some special or rare $$$ Did mopar use anything special and if so what...

Need a stock set of ly rods for a 440 , not looking for rebuilt , Just a good set of stockers NEED THEM ASAP -- tried craplist and got a bunch of morons but no rods. My engine builder is waiting - Help-