Search results for query: *

Recently scored a 90's Stanley Vidmar Cabinet from work. A manager got about a half dozen cabinets from another plant location, and "raffled" them off. I was lucky enough to get one. These are definitely top shelf units, and I'm sure glad they didn't get scrapped. Not sure how long they sat...

Left side of my 72 Satellite sits 1.5" lower in the front, and 1.375" lower in the rear. The garage floor is acceptable level-wise. The front end is basically stock K-frame/T-bar, while the rear is a 4-link with Viking Coil overs. The rear has the shocks set at the same height. I've not...

2 days ago I'm cruising along and suddenly the engine dies. The first couple attempts at restart produced very weak and short firing. After that, no firing what so ever. Troubleshooting results so far -Battery (Redtop New) 12.6 V -Alternator (Tuff Stuff 130 amp New) 12.3 V -Ignition Box (MSD...

Recently got my upgraded dash with new harness, and Gauge LED's installed, and began testing lights, signals etc. Other than a blown 5 amp fuse for the Instrument Display (Gauges), everything else looked OK. Decided to take her for a spin around the block. It was dark and the headlights seemed...

The back of my Ashtray/Cigar lighter has a Male Spade Connector on the top of the Cigar "Cylinder". I don't have a pic of mine at the moment, but will include a pic of one that doesn't have the connector for reference. You can see the opening on the top of the cylinder where mine has a Spade...

When I turn on my signals, the fronts are correct and the rears are opposite. I'm sure it's something idiotically stupid on my part, but thought I'd ask in the event anyone else has experienced the same thing, or can give me some better troubleshooting tips. I recently made several upgrades to...

Quoting my own recent post, to see if anyone else has encountered this level of nonsense while troubleshooting or upgrading their electrical. In summary, my Starter relay was hidden 6" from my front tire, under a rubber cover/shield.

Hello All, I'm almost finished with the "MAD" upgrade on my dash harness, and will soon be installing the completed dash in the car (1972 Satellite). The problem I'm having, believe it or not, is locating the Starter Relay. I've had the car for 2 years now, and haven't traced every wire. The...

Hello All, I'm in the process of refurbishing my Dash harness, and following the MAD instructions on bypassing the ammeter. My question concerns soldering the butt connectors. I'm amateurish at best when it comes to soldering, so forgive my ignorance. Has anyone had success using an iron or...

I'm in the process of making interior changes to the Satellite, and am wondering why the previous owner would have made these cuts to the wheel wells, and all I can figure is it was to make a little more room for the rear tires (295/40/ZR20 Nittos). Has anyone else encountered this sort of...

Received this as a spare when I purchased my 72 Satellite. I have not tested it, though it looks to be in pretty decent condition. It also comes with a spare wiper switch assembly. Asking $250.00 OBO, plus shipping. Located in Easton, Pa.

All of the pieces were painted white (Original B5) by the previous owner and the paint is peeling and/or cracking on the plastic components. I'm not trying to pass these off as being in great condition. However, based on the efforts I've seen put forth in this forum, I felt an obligation to...

Hello All, Forgive my painting novice...I'm replacing my steering column "Collar" with a "Floor Mount" piece since it originally had a Column Shifter and I now have a Floor Mounted Auto Trans shifter. I used a fine grade Scotch-Brite pad to scuff the new piece from Classic Industries that was...

I'm looking to paint the center sections of my front buckets and rear bench seats blue to match the blue panels/carpet etc. Do I need to use Adhesion Promoter, I know it's recommended on plastic ? Does anyone have experience/advice on painting/dying leather? Thanks

Purchased: March 2019 from a gentleman in Rochester NY. Originally: 318-2bbl/904-Column Shift/Powder Blue(B-1) Exterior/Poly Blue(B-5) Interior/White Vinyl Top/Bench Seat. Previous Resto-Mods (Completed in 2003): 440 .030 over/10:1 Compression/509 Purple Camshaft/440 Source Aluminum Heads/750...

Hello, Looking for any tips/advice on installing my new aftermarket Gauge Panel/Gauges/Wiring Harness in my 72 Satellite. Should I remove the steering wheel, drop and/or remove the column? Any tips you guys could pass along are greatly appreciated. I have the Service Manual and a laminated...

Anyone know a source for new or good used inner door panel emblems ? Specifically, I'm looking for 72 Satellite Flag Emblems for the Front Upper Door Panels. I bought new panels from Classic Industries/Legendary and they didn't come with them. I've tried all the repro websites I can think of...

Looking for a good used 73/74 RR Power Bulge Hood.

Curious if Plymouth made a Non Air Grabber Bulge Hood in '72 or in any other year that would fit my Satellite. I've seen the '73 Hood with the "Holes" at the front but would prefer something smoother like the Air Grabber Hood (Minus the cut-out). I really like the '73 Charger Power Bulge Hood...

Hello All, Just purchased my 72 Satellite from a gentleman in Upstate NY about 1 month ago. Originally a 318-2bbl/904-Column Shift/Powder Blue Ext./Poly Blue Int./White Vinyl Top/Bench Seat. His Resto-Mods included: 440 .030 over/10:1 Compression/509 Purple Camshaft/440 Source Aluminum...