Search results for query: *

Hi all, I have a simple, but unusual question. I have a 67 Coronet 2 door hard top and the vertical stainless trim on both the back of my door window and the front of the quarter window have come loose and fallen off. In fact, I had to take the door card off and fish the trim out from inside...

I’ve seen a lot of discussion regarding the over center spring. I have a 67 R/T 4 speed that has had the over center spring removed and I hate it. Obviously someone put an aftermarket diaphragm clutch in and it makes my clutch pedal sit about 2-3” lower than the brake pedal. My question is…Is...

Hello all. I purchased my 67 R/T about three years ago and noticed that even though I’m 6 foot tall, I seem to sit low and far back from the pedals. So I decided to investigate a learned that apparently, the previous owner must have been very tall and removed the factory seat rails and replaced...

Have a question. All of the sudden, I have been finding oil slung on the drivers side top of my engine and it is all over the coil, under the air breather, on top of the valley pan and even reaches the front of the carburetor. Mechanic says there is no leak in the intake. Odd place for oil...

Hello, looks like I’m going to need to replace my clutch and pressure plate and I’m wondering what everybody is using out there. I have a 67 R/T and I am getting a lot of chatter after driving the car for awhile. Doesn’t do it cold though. Your input is appreciated

Hi all. I’m in the process of doing a SSBC disc brake conversion on my 67 Coronet R/T. I am to the point where I am installing the Jegs proportioning valve and I’m looking for a good location. If you have done this to your 67 Coronet, would you mind sharing pictures of your layout? thanks!

Hello all, I have a 67 Coronet R/T with the 440 that I would like to improve on. I’d like to lighten the motor up a bit with new aluminum heads and intake, but would like to get the entire kit since I have no idea of what cam is in it now. I am looking for something plug and play. I do not want...

Hello all, I have a 67 Coronet RT that I would like to switch headers on. Mine are rusted and the passenger side rests on the inner fender well, which drives me nuts. I don’t want the heat to cause my inner fender well to start rusting. I’ve been watching some posts and it seems like either TTI...

Looking for a decent set of stainless drip rails for my 67 Coronet. I can have them polished if need be, but prefer no dings or dents. thanks!

Hello all, recently got my car back from the shop where they had done some adjusting to the clutch. When it came back, the clutch pedal was resting about 2” lower th and the brake pedal. so I climbed under the dash and found this. Shouldn’t there be a spring or something that pulls the pedal...

Hi Guys, so I’ve been told that my front suspension is shot on my 67 Coronet RT. I’m looking for recommendations on the best place to purchase rebuild parts. I would also like to convert to manual disc brakes on the front at the same time. Disc setup needs to work with my Magnum 500 wheels. I’m...

Looking for a console tachometer for my 67 Coronet RT. The sending init would be a plus. My console was long gone when I bought the car. I’d like to bring i5 back to original

Trying to help my son find a father/son project car. His budget is very low and he realizes it will be a long term project. Only criteria I have been made aware of is that he would really prefer a 4 speed car. This is going to be one of those situations where someone has an old car in a barn...

Hello, I have a 67 RT with a 440 big block, 4 speed manual, and a 8.75 rear end. Was this combo ever offered? I thought all of the 440 4 speeds came with Dana60 sure grips Thanks in advance

Hello all, Does anyone know of a company that is making digital analog looking gauges for a 66/67 Coronet? I see 68 and up, but not the 67 RT. Will 68 fit in a 67 dash? Thanks!

hello, I have a 67 Coronet RT and the stock distributor seems to be shot. .010” slop in the shaft. I want to replace it with an electronic ignition distributor, but I don’t want to spend a fortune and want something easy to install. Another question is will I need to swap out the coil? I...

I have headers on my car now, but the passenger side actually rests on the shock tower. I don’t like that. I see a lot about TTI headers. Which part number is the correct one? I would probably want the ceramic

So I just bought my 67 Coronet RT a couple of months ago and it came with a Torque Thrust rims and new P255 R60 15 tires on the rear and 70’s on the front. I know a lot of people like that look, but I really like the Magnum 500’s. I’m wondering what size wheels and tire I should get. I want 70’s...

i am asking for anyone that has a picture or what the brake setup should look like on the rear of a 67 Coronet to please share. I posted pictures of my rear hubs as I was removing the axels for another repair when several members posted that my brake set up did not look correct. There was an...

i recently purchased a 67 RT with a freshly rebuilt 440. When I first received the car, I pulled it in the garage and shut it off. I immediately heard liquid hitting the exhaust but didn’t think anything of it because it was raining like crazy out. The next day, I took it down the road and back...