Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hello all should I be concerned about the wear on my gear, 470 TF 270 headed motor with a solid roller cam street strip car has less than 1,000 miles on the motor.
Hello all I know this has been covered by can't find anything about it.
I'm on a 67 belevedre alternator needs changed , so I figured why not upgrade.
So is involved to upgrade to internal regulator alternator..
Intended use of car is street/strip right now factory radio works along with...
Hello all I'm having issues with my belt coming off at high rpms. What have anybody done to help fix the problem
Thanks for pointing me in the right direction
A pair of center line wheels front of the rims have been painted black they are already drilled for screws, looks to be 4.5 b.s. multi lug bolt pattern asking $250 for the pair plus shipping but prefer pick up. Located in Columbus, Ohio
Hello I know nothing about these meters and I'm attempting to build my spark plug wires which they are MSD super conductors 8.5. Which setting do I use to get the correct reading.
Got cam and timing installed went to put the cover on and it's not deep enough. I tried a aftermarket chrome mp 1 from jegs and stock 1 which would probably fit it I stack 2 gasket but that's last resort. Has anyone ran into this and what was the fix
Thanks in advance
Doing the conversion on my 67 Plymouth and with the caliper on the right side it's at the. Low point if I switch sides left is up top but worried about brake hose routing see pictures which way will work
Thanks
Hello all what would be an acceptable various in piston ring gaps. I'm using total seal rings CR9190-125 which is 4.375 bore gap was supposed to be .020-022 from their tech site, I'm was .021-.024 on the top ring and the second ring was .010 they told me to file fit them which from their website...
Hello all on my 67 belvedere the left side rear turn signal and brake light doesn't work tail light works fine hazards on the left side just barely flickers, I switched bulbs from left to right and still same problem also replace the brake switch on the column. The housing is pot metal so would...
Hello all what size headers are you using with trick flow heads with low deck block in your B-body, I would like to use D452 but there tech line says that they won't fit my 67 Plymouth
Hello I'm working on a 67 Plymouth belvedere , trying to get the evaporator out the question is do I have to unbolt it from the firewall or does it just sit in there and all I have to do is pray it out BTW heater core is already out
Hello all to remove the ad evaporator do I need to unbolt the whole heater box from the firewall or does it just pull out....plan is to have just a empty box I got the heater core out already. 67 Plymouth belvedere is the car I'm working on
Hey everyone starting to kick around ideas for the changes imI going to be doing on the car and not sure what's the best place to mount the electric fuel pump , I have 2 of them 1 is Holley blue the other is Mallory 250 the car is a 67 belvedere
Thanks for the input
Hello all I tore down a motor I bought at the Indy swap meet and need. help trying to get info on the cam that's in it numbers on the back read 02245 us
Front reads 300/310 with CD and A off to the side
Thanks in advance
Hello all I tore down a motor I bought at the Indy swap meet and need. help trying to get info on the cam that's in it numbers on the back read 02245 us
Front reads 300/316 with CD and A off to the side
Thanks in advance