Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I am looking to convert my taillights to led. I ordered my bulbs from Superbrightleds and the bulbs work for the 1st light and for the reverse lights but the center light does not work.
The bulbs I ordered were these, which work in bulb location 1 and flash when i use the turn signals. When in...
Well at some point my headlight switch and connector melted.
Looking to replace place both could anyone recommend a good source for the switch and 7 pin connector?
Have 72 Charger with bucket seats and looking for replacement seat belts both front and rear.
Looking for a modern retractable option, not NOS etc.
Found these, is this a good choice?
1971-74 Dodge Seat Belts - 3 Point Conversion - Bucket Seats - Starburst Buckle
72 with 318. At idle I am only getting 13.5v at the battery. If I increase rpm is rises some, but only to around 13.7.
When driving with headlights etc they will turn off sometimes and at idle the turn signal blink very slow compared to a higher rpm.
Also any idea how to identify this...
Recently had my 1972 Dodge Charger in the shop and they recommended replacig the steering column.
Is it possible to have the steering column rebuilt? Any recommendations on shops that do this?
Mechanic Notes:
*Steering Shaft Binds Minimally on Left Turn - Recommend Steering Column...
So I took on cleaning and rebuilding my carburetor. I wanted to try cleaning them in my ultrasonic cleaner. I tore the carb down and put them on a 50/50 mix of simple green and water. I ran a cleaning cycle and came back later to check out the results and the carburetor came out battleship...
Hey, when I use my hideaway lights the motor will keep spinning when I close/turn off the headlights.
Can anyone recommend someone that rebuild the motor and what a fair price would be?
Hey have a 72 Charger with 318. Looking to install a cutoff switch for a few reasons (parasitic drain, theft, fire/safety). I want to install one in the cab of vehicle where I could reach it easily. Not looking for one that can used from outside of the vehicle.
Has anyone installed one and...
Hey just installed the kickdown linkage from bouchillon, because the Kickdown linkage I had was just thrown together from the previous owner. Wanted to see if someone could take a look at what I have installed and let me know if it's correct?
It does seem like I have too long of a throttle...
Hey I have a 1972 charger with 318, 727, and Carter AFB 9605S.
I thought at first my carburetor was out of adjustment, but turns out the kickdown linkage is sticking when engaging it with the throttle.
Since the linkage is pretty rough and seems to be missing a return spring I was considering...
Hey I have a 1972 charger with 318. It has a Carter AFB carb on it.
I am having issues recently that when I start the car. I'll pump the gas pedal 2-3 times then start the car and the rpm will shoot up to about 4-5k and drop down to about 2-3k. Then the car will idle around 2k.
It did idle...
I would like to install a cutoff switch for track or whatever that will cut both the battery and alternator. This would be for use while the car is running. Was wondering if any one has suggestions on model and install location.
Next I would like to put a kill switch in to help prevent theft...
Hey just recently picked up a 72 charger this past weekend and have been going through it.
Previous owner had done alot of work restoring the charger as far as sanding and repainting frame, underbody, engine bay, and body. The charger runs well, but does have some issues.
There seems to be a...