Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I got 3 point belts for my 68 coronet from seatbelt solutions. I noticed by looking at the design of the buckles (pictures) that they are not form fitting. The anchor is just held by a spring loaded ramp. Under tension, this ramp is pushed up and the buckle opens. I tried it.
I contacted my...
Just tried to install the windshield, but we couldnt get it into the gasket. No chance. Could it be that the gasket is too thick? I have the one from Dantesparts. It looked like it was of good quality. But i really cant imagine how to get the windshield into it. Is there another source of...
Howdy,
does anyone have a dimensioned drawing of the crankshaft (to flexplate) bolt pattern of a 360 LA small block?
Do stroker crankshafts usually have the original bolt pattern?
Thanks a lot...
Dieter
Hi Folks,
whats the difference between the park lamp (wire L6-18BK/Y*) and the side marker lamp (wire L17-18DGN*) in terms of activation? Shouldnt both be activated at the first position of the head lamp switch and therefore more or less be the same?
My car is a 68 Coronet 4 door sedan and i...
Hey Folks,
could anyone give me the measurements of the brackets which are bolted to the rear subframe? Its a pretty simple part. As the thread title says, I'm talking about the Hotchkis rear sway bar brackets.
Background is, i want to weld them to the subframe instead of bolting them, because...
Hey Folks,
I'm restoring my 68 440 318cui 4 door Coronet with A/C (at least it had one) and currently working on the heater case. In the manual i saw that there should be a tube attached at the engine side of the blower motor. Once its called "motor cooler tube" and later its called "air tube"...
Hi Folks,
is there any company where i can order custom flexplates or a blank 3rd gen hemi to NAG1 flexplate with only the middle hole already stamped so that i can drill the others by myself?
Many thanks
Dieter
Hey Folks,
let me tell you my story.
I bought a 360LA which ran in a offroad jeep until then. The guy said it is internally balanced, but google says every 360LA is externally balanced. The harmonic dampener at the front is for a internally balanced engine. The flexplate that came with it is...
Hi BBody guys,
straight to the point. My '68 TF 904 makes horrible noises. But first what i did:
The transmission was leaking everywhere. I had it out to install new seals for the shifter lever. So I straightened and cleaned the pan, gave it a new gasket and replaced the outputshaft seal. I...
hi guys,
does anybody have a complete wiring diagram for my '68 318 A904 dodge coronet 440 4 door or knows where i can get it?
The search function didn't bring usable hints...
Tanks and greets from austria!
Im Dieter from Austria (the Schwarzeneer Austria, not the kangaroo one) and i have a '68 Dodge Coronet 440 4 door. Its a 318 with the 904 and the 8-3/4" rear axle. I have some plans for it, but for now i have it to get registered in austria.