Search results for query: *

Looking for a machine shop in southern Ontario I'm in Toronto. There's ones that i know of but there 4.5 hours west of me or 4 hours east of me. Don't mind driving a bit. and please don't tell me Beaty and Woods. thanks Jim

I have a 70 gtx 440 does anyone know or have a victor intake with tfs 240 heads installed in a 70rr or gtx, just trying to figure out if they will have clearance for the hood and air grabber when the hood is closed. thank you

Looking for a hydraulic roller cam, my set up is trick flow 240, max valve lift 680 victor intake Quik fuels Q950 carb Harland sharp 1.6 roller rockers stroker kit from 440 source 4.350 bore 4.250 stroke compression is 10.6-1 comps recommendation was custom Grinde at 50 int 252 ext 262 lift...

Hello all restoring my 70 gtx brake booster and master cylinder was missing when i bought the car, i have disk on the front and drums on the rear, all help would be appreciated Thank you

Hi guys looking for some help on building my stroker, looking for about 750HP the heads I have are the trick flow 270 Victor intake, 950 HD carb, This is the cam crower recommended https://www.crower.com/searchresults/?part_num=f19155&x=0&y=0 and was thinking of going with 440 source rotating...

Not mine but I think its worth looking at its listed for $15,000 canadian https://www.kijiji.ca/v-classic-cars/ottawa/sleeper-mopar-station-wagon/1500533578

Can someone please help me put a price tag on this 540 stroker, I also herd it running sounds good. Designed as a high torque street engine or street/strip. 100% brand new, upgraded, high quality parts except seasoned 440 block. Includes many extras not typically found on Mopar strokers...

Im at it again looking to buy this bee, its a 383 auto not much options other then air non matching numbers, he has 90% of the metal for the car. interior is clean and dash is also good, looking for help on putting a price on it and what you guys think. thanks jim

having a hard time putting a price on this car as I'm looking to buy it, he's asking $3700 for the roller has no interior no fender tag but has a build sheet nothing special about it, also needs a rear quarter bumpers almost everything is missing except steering wheel and dash, its a 383 4 speed...

can someone please decode a broadcast sheet for me

If anyone has one in good shape please pm me looking for one that has the turn signal cut outs

I have a chance to buy this set up for 9500.00 what do you guys think 500ci 10:1 Mopar Motor Professionally built. Built for boost. Dyno'd at 615 hp and 647 ft lb of torque Built for forced induction RB mopar stage 6 heads 4529335 78cc Chamber, 210cc Intake Runner SCE 064384 Copper Head...

I have a 4 speed 70 gtx with console, the transmission has the long tail shaft for both mounting positions of the shifter (B-E) can some one please help me find a shifter. Everywhere I look for a shifter it says its for a NEW PROCESS, MOPAR B-BODY (422) I check the diagram and it says mine is a...

looking for a 440 after market block please pm me

HI I'm looking for a aftermarket 440 cast iron block please pm me. Thanks

hi there glad to be part of this site, starting to restore my 70 GTX all numbers matching with scat pack