• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  • Users: PBR1
  • Order by date
  1. P

    Performance Ignition Advice...Accell?

    The latest Accell cap and rotors are not of the same quality as the older ones. I know the 8320 kit with the tan cap does not have the ribs inside the cap and are cheaper quality, even the rotor is different than the old Accell stuff. One thing I always do to the rotor is put some epoxy on the...
  2. P

    Cause of blue smoke out of exhaust pipes?

    Just did valve seals 2 weeks ago on a 440. No rope or air just brought it to TDC did 1 and 6 cylinders then rotated another 90 degrees and then did another 2 cylinders that were on TDC. Every 90 degrees there are 2 cylinder at TDC. The valves do not drop far. I used the Proform lever spring...
  3. P

    1971-72 Air Grabber/Ramcharger Question

    Here you go
  4. P

    Milestar Streetsteel RWL

    I don't think so.
  5. P

    Milestar Streetsteel RWL

    I see Amazon list them too. Just do a search for Firestone Firehawk Indy 500 15 inch.
  6. P

    Milestar Streetsteel RWL

    They have 255 60, 275 60, and 295 50s all in 15s. I have seen 255 70 15 also.
  7. P

    Milestar Streetsteel RWL

    Firestone Firehawks are available again in 15 inch.
  8. P

    Milestar Streetsteel RWL

    I had some on a Chrysler I had. They were good tires.
  9. P

    SOLD 1967 GTX 440 4SPD W/ DANA

    Did Richard Petty sign the glove box?
  10. P

    RB valley pan and intake gasket...again.

    Before you put it together lay the intake on the motor with no gasket and see how it fits, see if the intake fits flush on the heads. You can use a feeler gauge to find it the intake fits flush. Usually if the intake is sucking oil the ports in the heads will be oily and the intake ports will be...
  11. P

    Dont go by pictures.

    Along with a vintage 70s joint under the carpet.
  12. P

    were to buy 6 pack base for n96 setup?

    I think you could just remove the air dam in front and it would be the same.
  13. P

    Dont go by pictures.

    Factory orange peel paint jobs.
Back
Top