Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hi! I have done alot of tuning with my Mopar 493 stroker engine, Edelbrock avs2 800cfm, Edelbrock rpm intale, Edelbrock E-Street heads 84cc, Comp cam xe275hl camshaft(231/237@050), 10,04:1 scr, Fbo distributor set at 18 initial and full manifold vacuum brings it to about 30 at idle, 34 degrees...
Hi! What can be said about these spark plugs, i think they are to cold and wrong for my engine, it is ngk 7 non projected tip. The engine 493 cui stroker scr 10,04:1, edelbrock e street 84cc heads, xe275hl (231/237@050) camshaft, the engine runs great but slight misses on idle, the engine have...
Hi! I have a pretty new built 493 cui stroker engine with about 400 miles on it. The set up is a eagle 4,150" crank, eagle H rods 6,760" , Mahle forged flat top pistons 4,350", Mahle plasma moly metric ring pack file fit, Kings main and rod bearings 0,002" clearance both, Edelbrock e-street 84cc...
Hi! I did a compression test on my 493 stroker engine with about 400 miles on it, 231/237@050 camshaft, 10,04:1 scr, it have stand now for a few mounth during the off season, i just wanted to see what i have. The compression test show 200 psi on all 8 cylinders, i crank it over 5 times on each...
Hi! I checked my 493 cui stroker with a endoscope through the spark plug holes and all 8 cylinders looked nice, it was only in one cylinder i see some black marks, same carbone dust. What can it be? Is it maybe a sharp edge on a ring or something so it builds up little carbon? The engine has go...
Hi! I broken in my camshaft xe275hl in my new built 493cui stroker in July this summer with succes, i use Joe Gibbs break in 10w-30 oil and have shange the oil and cut the K&N oil filter open a few times under the 400 trouble free miles i have on the engine and find no metal or any debris in the...
Hi! Is there someone who have tried this knock link g4 out? It would be awesome to have a light that warning for detonation before you can hear them, i suppose this knock link g4 learn the normal sound from the engine and react if their is some abnormal sounds over that. I thinking about try it...
Hi! I have built a Mopar 440 to 493cui stroker, Mahle 4340 flatop forged pistons with file fit rings, Compcam xe275hl( 231/237@050 and .525 lift both int/ext), Edelbrock e-street 84cc heads, Edelbrock rpm intake, Edelbrock 800 cfm avs2. Its running great and have a huge low end, no detonation at...