• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. 4gear

    67 Satellite front hub

    Does anyone know what years and models that the front hubs are the same?. Looking for a front hub for my 67 drum brake Satellite.
  2. 4gear

    1967 Satellite 4spd conversion back up lights

    So after some more research, the 66 and 68 b body bulkhead connecter is different from the 67. Where the violet wires go into the block pictured in the reply, there are no connection in my bulk head plug they are empty.
  3. 4gear

    1967 Satellite 4spd conversion back up lights

    Hi, does any one have a wiring diagram for the main bulkhead connections on a 67 Satellite? We are trying to wire up the back up lights but only have the 68 manual which show it’s a bit different than the 67. So it’s a 69 833 trans and has the two prongs. From what we’ve seen the wires should...
  4. 4gear

    FOR SALE Bench Seat Compatibility

    Hi, wondering if a 65 Belvedere front bench seat will fit properly in a 67 Satellite?
  5. 4gear

    What is everyone working on in the off season.

    I’m reviving a 67 Satellite 383 4spd that has been sitting in a field for ten years. Was previously raced so already has 8 3/4 posi with Moroso wheel studs, scatter shield and driveshaft loop.
  6. 4gear

    Weather on Dec 23rd in da Nort Country

    Just below freezing here in the interior of British Columbia
  7. 4gear

    Red and yellow dot on tires...

    Worked in biz for a lot of years. We were told by the manufacturer that the DOT is basically the heavy point of the tire. So with the wheels being drilled out for the valve stem, that is the light point of the wheel. So makes sense to line up the heavy point with the light point. Now, this is...
  8. 4gear

    67 Satellite

    I’ll try and get a picture tomorrow. Thanks again
  9. 4gear

    67 Satellite

    Thanks. I figured that the motor was a 383.
  10. 4gear

    67 Satellite

    Hi started the thread in Welcome Wagon about the new to me Satellite. I got under it and got a few pictures of engine transmission and Differential. Anyone able to decode them for me?
  11. 4gear

    Mopar newbie

    So spent some more time getting the Satellite up and running today. New carb and a set of plugs and the way it went. Next to change out the fluids and go through the brakes Also found some numbers on the block while changing the plugs if anyone can decode them that would be great
  12. 4gear

    440 ID #s

    Great thanks for all the info. I figured it was forged by my own research too. I live in Canada and the engine came from up North so that’s why there is a block heater in it. Good news on the Satellite. I got it fired up and the engine is good. Turns out the oil pressure sending unit had a...
  13. 4gear

    440 ID #s

    Got the engine given to me with a car I just purchased. Would like to break down the serial #s on the parts to I’d what’s all there.
  14. 4gear

    Mopar newbie

    Thank you
  15. 4gear

    Mopar newbie

    So got a little time today and got the car on my hoist. It’s in great shape, no under car rust through anywhere.
  16. 4gear

    Mopar newbie

    Thanks
  17. 4gear

    Mopar newbie

    Yes plan on it. It was used for racing so the battery was relocated to the trunk.
  18. 4gear

    Mopar newbie

    Thanks Jerry, some good info. I’m not looking to do a concourse restoration, just a daily driver, so not to hung up on incorrect accessories. The engine does look fresh and you can see gasket material here and there so I’m sure it’s not just a spray can rebuild. Next thing to do is get a battery...
Back
Top