Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
The adapter is related to the Holley transmission mount kit. They have a universal bracket for all transmission options and specific mount adapter for each transmission.
Intro
Howdy Mopar enthusiasts! I am sharing my journey swapping a 5.7 Hemi and A727 into to my 1969 Satellite. I bought the car 18 months ago after the car had been sitting for 10+ years. My Satellite came from the factory with a 318/904, column shift and 741 case 8 ¾ rear end. It’s an AC car...
That looks like it would clear the license plate for sure. However the mounting holes in my bumper are further apart (and they match the bracket). On my bumper, the license plate opening is a slightly different shape. I wonder if I have some funky non OEM bumper?
Does anyone have a picture of how this mounts to the bumper? Its supposed to fit a 69 B Body but I cant see how it mounts to the bumper without getting in the way of the fold-down license plate. Are there other versions of this bracket specific to 69? Sorry in advance if this is a dumb question!
Removing heater and a/c when I do my gen 3 hemi swap. Does anyone make a blanking plate for the firewall penetrations? Trying to avoid welding a plate myself. Thanks
Thanks 451 Mopar! I hadn't thought about a piece-meal approach to correcting the issues. I was going to redo the whole car wiring because most of the wires are brittle, the insulation is worn, and the fuse box and other connectors are rusted and or brittle.
As for the swap, it will be a 2016...
Please help me with recommendations (vote up to 2 choices) for a new whole car wiring harness. Today the car has 318/727, but will be doing a hemi swap this year. I will be using an OEM hemi engine harness with minimal accessories. Assume I have a DIY average level of electrical ability. Feel...
Swapping front drums to discs. Using the Willwood 140-11020 kit. Instructions show the caliper being mounted on the front of the disc, but Doctor Diff recommends a rear mount (closer to firewall). What difference does it make? Something to do with sway bar or suspension parts? Installed it per...
Think I have it figured out, but wanted to check with you experts first. Installing new OEM door panels, but they did not come with instructions. The old door panels I am replacing were not original, so i could not use them as a guide.
Am I supposed to remove the pre-cut material completely to...
Installing new door panels with water shields. The shields didn't come with any tape or other method of attachment. Are they just friction fit in between the door and door panel once snapped in place? Or should I tape them to the door prior to installing the panel? If tape, what kind?
Thanks,