Search results for query: *

Hey guys - I’ve searched but haven’t found answer. Any ideas? 68 block 440. Battery isn’t charging while running. Battery is new - had to use jump box to start and get car home after a show - car had an hour or so of run time - car died on me in gear and had no juice. Testing now in garage -...

Big block 727 auto trans behind a 440. Have had this for a few years - just wondering your guys’ thoughts. Routine - Start in Neutral - let it warm up, put into gear and it pops into gear right away. Mostly reverse to back off of lift. Once I get into street, I shift to N let it idle for a...

Hey guys - saw @Outlaw525 post on street racing and got me to thinking - any interest in these reproduction DC Blew Chevy Door Off Decals? If so - can make a new thread and add to my website. Would probably sell in packs of 5 or so. Good conversation starter I would think!

I'm not old enough to have been alive during the good old Woodward Ave. street racing days or all the street racing that occurred all across America in the 60s and 70s with our beloved Mopars especially. Any pics or stories of either you racing or watching street races back in the day? Would...

They’re not for everyone - but I like the nostalgic look of cowl gauges, and I like being different and unique. Just about finished up - some finishing touches needed yet. Took some small threaded rod and some small round stock and welded them together to fit between the cowl vents - then...

Hey guys - mounting my oil pressure gauge on my cowl. Have everything plumbed just need to wire. A) Does anyone know what wire would be considered to be ignition inside the firewall? I know I can go into the orange wire inside the car, but would like to connect to one of these inside the...

Hey guys, currently have 11" manual drum brakes on the front of my 67 R/T and looking at various Front Disc Brake Conversion kits (have read through the numerous threads on the forum as well) and have a few questions. 1) Recommend the upgrade to power brakes with a booster? Or are there kits...

Kinda interesting to look at the Billboard top 100 from the year of your make of vehicle. I wasn't alive during this era but have fun thinking about what was going through the radios when these cars were new. https://en.wikipedia.org/wiki/Billboard_Year-End_Hot_100_singles_of_1967...

Aside from obtaining a center console and all the pieces (and modifying the actual steering column to get rid of the column shifter) - does anyone know if anyone repos the correct brackets that are welded to the floor? 67 Coronet R/T. I know this conversion is completely unnecessary, just...

Newbie here when it comes to body work. Got my patch piece cut out and slowly spot welded and grinded with 80 grit flap disc. Those small divets - do I weld more and grind again? Or does a thin layer of bondo cover those types of imperfections? I’m assuming I need to keep welding on those small...

Had a few spots down low that had some cracks - which I could tell was bondo from previous owner. Car still looked good (not a show car by any means) but decided to start chipping away at it. Literally and figuratively. More rust and bondo than I thought and was hoping once I started to get...

What would be your Top 10 music playlist as you were cruising in your mopar during the 60s and 70s? I was born in the 80s while some of you were lucky enough to be driving our B Bodies during the era in which they were made. So, what was your top 10 songs you were listening to in your mopar...

Beautiful morning here in Minny - had to take the mopar to school today! About 25 miles one way from my home to school. Aside from owning a graphics business, I teach high school social studies (AP Human Geography and Human Geography). Assuming I’m the only teacher with a b body mopar - haha.

Miles tried to roll over and odometer stuck. Subsequently - Speedo started doing the wonky back and forth and ticking noise constantly at the same time the odometer stuck (pic looks like speedo is working but it was on its way to 150 and back ha). I greased the speedo line last year to fix that...

Thought I developed an exhaust leak while driving last night - just didn’t sound right. Get home and can determine ticking/knock coming from front passenger side. Pull #2 spark plug and knock disappears. Ok it’s from there. Pull valve cover - visually inspect rocker arms and push rods on #2 and...

Hey guys - have an intermittent electrical issue. If the fuse block wiggles - sometime dome light/instrument panel works - then sometimes it doesn’t. Buss fuses all look good - but connections seem to have some corrosion. Any help would be appreciated - electrical is not my strong area for sure...

Hey guys - sorry - another question. Still tackling these issues to get it ready for the year. Changed header gaskets, new valve cover gaskets, new oil (Amsoil ZRod), and added a M/E Wagner PCV Valve setup (still dialing in). While tuning the pcv valve I noticed a new oil leak on the passenger...

Hey guys - 440 and what I thought (and guess still could be) was an oil leak stemming from the rear passenger valve cover - now has me wondering. Drivers side is completely dry and no sweating on the head/block area. Passenger side - wet on head and block by 6 and 8. What I noticed when I shut...

Hey guys - have a stuck #2 cylinder header bolt. Been spraying it with Aerokroil every day for a week. Probably the most difficult bolt to get at - closed end wrench doesn’t fit, open ended wrench does but minimal room. Just did a propane torch on it but don’t think it gets it hot enough. Any...

I am sure others are the same (I’m not sure) - but looking for a passenger side outer bumper bracket for my 67 Coronet R/T. Goes from back of bumper to outside of front passenger frame rail. Thanks in advance!