• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  • Users: 2quick
  • Content: Threads
  • Order by date
  1. 2quick

    Got the 572 back, Now lets find some power

    As some may know, my brand new 572 was sent back to INDY to fix a balancing issue. Its is finally fixed, and was run on their dyno for a few hours to break in, and a couple power pulls were done. It made 781hp and 680tq. I am hoping with the right intake and throttle body these numbers go up...
  2. 2quick

    Help! New 572 vibration at 3000 RPM

    Hey Guys, I’m hoping someone can talk me off the ledge right now. Finally got the 572 INDy Max installed and running but I here is a really bad vibration that start around 2,000 and gets worse to 3,000 then starts to get better but never really goes away. Short block was built by INDY the rest...
  3. 2quick

    At what point is it needed (NHRA Tech inspection)

    I post a roll bar question in another thread earlier and thought of a few other things I cant get a grasp on. In anticipation for Drag week in September I want to make sure I'm legal to run 10.00 index, At what point are the following needed? 1. Trans blanket or shield 2. Roll bar padding 3...
  4. 2quick

    Help with decoding NHRA roll bar rules

    I will be running Drag week in September with my 66 Satellite. I have a roll bar that has allowed me to run to 10.00, that no track official has ever had a problem with. What I'm concerned about is I don't use "D" Bars as I often have my kids in the back seat going to car shows and such. I...
  5. 2quick

    SOLD Comp cams, keyway adjustable billet timing set

    Brand new never used!!!!! $100.00 plus $11.00 shipping COMP Cams Keyway Adjustable Billet Timing Sets COMP Cams keyway adjustable billet timing sets are an exceptional choice for your street or race vehicle. Whether you're building, replacing, or upgrading, these sets will deliver the...
  6. 2quick

    FOR SALE New ARP Chrysler torque converter bolts. 240-7302

    New ARP Chrysler torque converter bolts. 240-7302 )$10.00 plus 9.00 shipping
  7. 2quick

    Bolt hole size of 727 transmission ears for Fore\Aft limiter?

    At work right now, trying to order rod ends but forgot to measure what size the hole is on the ears of the trans.. Any Know?
  8. 2quick

    help with Flex Plate (which one) 8 bolt crank 10" converter 900+hp

    Went to install the 572 and realized it's an 8 bolt crank and my 6 bolt B&M flex plate won't bolt up so I'm stuck till I get a replacement. Any recommendations on something that will hold up to 900+ Hp with a brake? Ohh and I need to order this overnight so quick help is appreciated.
  9. 2quick

    Need help finding a custom cam manufacturer with a decent turn around time.

    Had a 572 Maxx built by INDY and the cam that was speced has been on order at Comp for over 6 months. The short block is done just waiting on the cam. Comp states they don't have cores and cant even tell me when they would be available. Need this thing together before Carlisle (JULY) and I also...
  10. 2quick

    AR177M Crank trigger Bracket work with ATI917470E Balancer

    Just got the new 572 from INDY and I'm working to put together A crank trigger package. Heres my problem, INDY supplied me with an ATI917470E balancer that retains the stock pulley location. I want to run Andy's AR177M crank trigger bracket for use with Jesel belt drive which I have. The AR402DM...
  11. 2quick

    best oil pan for INDY MAX 572 in a 66 B Body w/QA1 k Member Drag Week Style Build

    Currently Assembling a INDY MAX 572 for my 66 Satellite. Looking for the best possible wet sump oil pan with a QA1 K Member, Torsion bars and factory style steering. This is a stout street car and want to give this engine the absolute best possible oil pan for longevity and HP. Externaly oiled...
  12. 2quick

    FOR SALE Crower ENDURAMAX Solid bushed roller lifters 426-440

    I have a set of Crower Enduramax 66233E-16 solid lifters for tall (Bushed) lifter bore engines. These have NBO/HIPPO oiling. These were run for about 2 hours then removed. I do not have tall lifter bores so oil pressure was a problem. DO NOT use these if you do not have bushed lifter bores. If...
  13. 2quick

    Anyone know what aftermarket RB blocks are avalable nowadays?

    Think I hurt the motor in the Satellite last week and I'm looking for a new short block. I have a complete 440 in the car with all the goodies including -1 heads that where really worked on and flow a bunch of air. The heads are way to big for my current application and if I'm going to do it, It...
  14. 2quick

    Flat tappet break in lube?

    I'm Installing a Comp Cams flat tappet cam in my (Not a Mopar) Gen V 454 marine motor, nothing super fancy about 450Hp. I've rebuilt and assembled the short block using Redline assembly lube and have an entire bottle left. In the past I've only used moly lube to break in a flat tappet cam, but I...
  15. 2quick

    WTB Looking for (1) 28x6-15 Mickey Thompson S/R Radial Front Runner Skinny

    These are not being produced at the moment, and was told by Mickey Thompson, that due to a nation wide rubber shortage, they suspended production on a few sizes, and this was one of them. No one has them in stock. I found 1 on ebay a few days ago, so I grabbed that up, Looking for another! If...
  16. 2quick

    Electrical wiring theory for race cars.

    Found this while searching for an answer to an electrical problem I'm having with a RacePak Dash. Found it very informative and thought I'd share. https://moretraction.com/wp-content/uploads/2019/01/Wiring-How-To_Web.pdf
  17. 2quick

    FOR SALE Brand New M&H Drag Radial 315/60-15

    For sale brand new never mounted (about a year old) M&H Drag Radials. These are $344 each from summit with a $10 oversized fee. These are also not available and back order from M&H till next year 6/21/22 according to summit. Specs: ROD38 Height 29.90” Section width 13.10” Tread width 11.60”...
  18. 2quick

    Lashing valves

    Hi guys, Quick question. I’m in the process of lashing my valves on my solid roller and I always use the EOIC method. I recently read somewhere that when the exhaust valve just begins to open you should adjust the intake but when I do this I actually get a looser lash setting as the exhaust...
  19. 2quick

    FOR SALE Not Mine! Steel WO23 hood Scoop (Holy Crap!)

    https://www.ebay.com/itm/1967-WO-RO-426-Race-Hemi-Factory-Super-Stock-Hood-Scoop-Steel-AWESOME-CONDITION-/293011338236
Back
Top