Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hello! Im going to put together a 426 and took some measurements of the crankshaft today since the bearings arent marked with anything.
I used a newly calibrated micrometer, and this is what i came up with, this is the average of many measurements.
Main journals, (1 being closest to front of...
Hello.
The Holley 850 DP on my stroker motor was leaky and old so I decided to swap it out for a new Quick Fuel 850 Brawler race carb (pretty mutch identical to the Holley.
Since the holley was adjusted to the engine on a dyno I figured I would just swap everything in between the carbs, so I...
Im looking for a 4 speed center console for my 1964 Polara, i believe 64-65 Belvedere and 65 Coronet is similar? If so that works too, not looking for originality.
And also looking for a decent dash pad for 64 Polara or Belvedere.
Im located in Sweden so must be able to ship here.
Hello. What yoke does the 8 3/4 axle on a 1964 polara use? Its a factory 426 street wedge/4 speed car if that matters.
I have an empty housing im going to set up as a spare with a more aggresive gearing, and i would like to order parts to it now. The car is garaged 14 miles away so i would...
Hello! Will a 1964 Plymouth Belvedere instrument cluster bolt into a 1964 Polara? Both mechanically and electrically? Or do i need to splice cables and swap out connectors?
I got an instrument cluster included with some other parts i bought, and now i realised i kind of like it more than the...
Hi! Has anyone installed a Borgeson power steering conversion kit in a 64 Polara with headers? Is it a good kit?
I have TTI Headers and it feels like i have very little room around the steering box, will it fit my application?
Thanks!
Hello. Im going to pull my diff to swap out the gears in my Polara, and im thinking about replacing my old cone type SureGrip with another carrier, but im not sure what to get.
It has a mild 505 Stroker with 589hp and 615lb/ft, 4 speed manual.
Are the Detroit Truetrac any good for the street...
Hi guys. The 505 stroker in my Polara is built for running e85 and boost, it makes 589 horsepower and 615 foot pounds of torque right now naturally aspirated.
Im not looking for anything crazy, maybe 800hp, so im thinking either a paxton supercharger or a turbo running low boost.
Anyway, as i...
Hello. Does anyone make a direct fit aluminium radiator for early b bodys? Mine started leaking bad and since i need to replace it it would be nice with an aluminium unit.
Or if it "sort of" fits from another car? Light modification is no problem.
Its a 4-speed
Hi! My heater core is leaking and i want to repair or replace it with a new one. Does anyone have the workshop manual and could send me the pages of how to remove and install the heater core? Would be much appreciated.
Hello! I need to (sadly) replace my Max Wedge scoop since my new engine is too tall, the carburetor touches the top of the scoop even without a filter.
I know there is raised max wedge scoops but i cant find one in sweden and i kind of need it now so i dont want to wait for a delivery from the...
Hello! Im looking to convert my 64 Polara to dual circuit disc brakes. At least in the front.
I have a 4 wheel drum and single circuit system now and it does not feel safe with almost 600hp on tap.
Is there some conversion to do using parts from different cars? I have seen the kits from...
Hello! I have installed a new engine in my Polara wich is a 505 stroker rb with a edelbrock Victor intake. So now the carburetor sits much higher and the stock throttle cable is too short.
I made a temporary extension that sort of works but i need to replace the cable and do it properly, i dont...
Hello! I just took my third member out of my 64 Polara to install a locker but I noticed the carrier bearings (I think that's what they're called) are different on the old open differential and the new locker.
The previous owner mentioned something about either the complete rear axle or the...
Hello. Im pulling my differential to install a limited slip, and also maybe put another gear set in there.
The engine is a 505 Stroker dynoed to 587 horsepower and 850 Nm (627 lb-fts) with a A833 4-speed behind it and it sits in a 1964 Dodge Polara 2 door. And it sits on 25 inch tall tires...
Hello! My polara has some rust damage around the windshield as well as the rear window. Does someone make sheet metal with the correct shape to cut and replace this or do i need to manufacture the pieces myself?
I hope you understand what i mean, my english is not perfect.
Im lifting the engine in my 64 Polara and it refuses to let go of the transmission. I have them seperated almost an inch but more than that is impossible.
Could the input shaft be siezed by rust to the clutch? Does anyone have a good tip for this or should i just try and remove the pressure...
Hello! Im trying to degree the camshaft in My 426 and about to loose My mind. I understand its not really possible to help over a forum but maybe someone has experienced similar issues and can give me some tip on what im doing wrong.
The cam is a Hughes Whiplash, installed centerline should be...