Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I know these have been hard to find lately so I thought I would pass this along.
Mopar OEM Rimblow/Tuftwheel Steering Wheel Adapter - auto parts - by...
I am looking for a set of seat belt bolts for a '68 coronet with Bucket Seats. It doesn't need to be a complete set, I will take individual or a couple bolts. I have not been able to find the complete set I removed from my car.
I am in the process of trying to install the firewall plate on the steering column. I cannot get the o-ring compressed enough to get the plate past the two parts that hold the plate in place. I have been trying both a new o-ring and the old one.
Does anyone have any tips for how to get this...
Has anyone seen a firewall grommet for the speedometer cable that is split to just slip over the cable?
I ordered a new speedometer cable from a well known Mopar person. When I got it I was surprised that the firewall grommet was not installed on it because all of the for sale pictures show...
I am looking for one of the u-clips and bolt that is used for bolting the top of the dash in at the bottom of the windshield for a 68 Coronet. Picture of one installed. Only one was rusty to the point that I could not get the bolt out when I removed the dash 10 years ago. Thanks!
I was at the Pittsburgh Vintage Grand Prix today watching the racing taking place at Pittsburgh International Raceway and Ralph Gilles from Stellantis brought his 68 Charger built by Speed Kore. He was at Carlisle with it on Saturday.
I got to talk to him about it a little bit and he showed me...
I am in the middle of rebuilding my steering column along with converting it from column shift to floor shift. My question is on the new lower collar for the floor shift. The old on that I removed for the column shift had a small Allen set screw that secured it to the inner tube. The new...
I just installed the engine in my '68 Coronet last week and I think something is causing the rear of the driver side TTI header to be too high. When looking at the header from behind the transmission cross member, the header is slightly above the cross member. So when I tired to installed the...
Has anyone used the bucket seat headrests from PG Classic? I want to add headrests to my bucket seats and wanted to if anyone had good or bad feedback on the ones from PG Classic? Or does anyone know if there are multiple manufacturers of the headrests, if there are which ones are the best?
In 2019, my wife and I visited the Floyd Garret Muscle Car Museum in Sevierville, TN. I was just thinking about it the other day and all of the nice Mopars that were there. I just went to look at their website and discovered that it just permanently closed at the end of October. I figured I...
If anyone is looking to get parts from PG Classic, they are having a sale this weekend. I know 15% might not be the best discount, but its still better then full price.
https://pgclassic.com/pages/halloween
Can anyone help me identify the 833 that I have.
It is a cast iron case with the long tailshaft that has both the B and E body shifter mounting locations.
The casting number on the tailshaft is C-99538.
The casting number on the side cover is C-95664 Z
The only numbers on the machined...
Looking for a 8 3/4" third member with 3.23 gears and a clutch style Sure Grip. I would consider other ratios as long as it is a 742 or 489 case as I believe those are the only cases that you can buy 3.23 gears for.
Looking to see if someone has a clutch pedal bearing install tool they are willing to let go. Bought one with an order from MegaParts 2 months ago but it’s still on back order. Jaime has no ETA in when he is going to receive more. Not in a major rush but I would like to get my pedals together...
I get the weekly emails from Zaino and occasionally open and read them. I decided to look at the one today enjoyed a good laugh when I looked at the picture and then read the text below it. I hope everyone else gets a good laugh from this also.
Do either Year One or Classic Industries have any discount codes for the Memorial Day weekend? I am looking to get a dash harness and am waiting for a sale.