• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. Mikey59

    71 charger brake line size

    iam going with all 3/16 line. Going with a new master cyclinder and making up my lines just takes a little bite of time.
  2. Mikey59

    71 charger brake line size

    Just ran brake lines from rear to prop. Valve. But wanting to install a line lock. In-between the master cyclinder and the prop. Valve but not sure what size it is does anyone know size it is? It looks like is 1/8". Coming out of the prop. Valve to the rear is 3/16.
  3. Mikey59

    Switching tires from 14 to 15

    Switching tires on my charger from 60 /14 to 60/15's . How many teeth on the speedo do I need to run in my transmission I've got a 727 auto. ?
  4. Mikey59

    Setting axle end play on a 8 3/4

    I due have one but I've never seen bottoms in that third member. Even when I had it gone through
  5. Mikey59

    Finished doing rebuild on 8 3/4 rear end

    Just finished up on the rearend Dr. Diff axles with green bearings and inner seals , 742 3rd member alburn pois. New backing plates With new bearings and 3.91 gears. New bilstien shocks and bushings for the springs and new shackles. Just have to run new brake lines
  6. Mikey59

    Setting axle end play on a 8 3/4

    Thank you guys for the advice. And the E manual. Iam glade you don't need the adjusters with the green bearings. I really didn't want to take both of them apart.
  7. Mikey59

    Setting axle end play on a 8 3/4

    Yes sir I do have a manual. My problem is I ordered Dr. Diff axles with green bearings already installed didn't come with adjuster on it . Checked the end play and it .010 to .012. Wasn't aware of the adjuster until I was watching you tube
  8. Mikey59

    Setting axle end play on a 8 3/4

    I changed out my axles and installed a 742 third member 3.91gears and alburn pois trac with Dr diff axles. Didn't know about having to set axle end play. Until watching some videos on youtub.
  9. Mikey59

    Setting axle end play on a 8 3/4

    Do you have to do both sides with the adjuster ?
  10. Mikey59

    Installed transmission cooler

    That looks nice. I like the lay out
  11. Mikey59

    Installed transmission cooler

    Thank you it took me awhile to get it figured out..
  12. Mikey59

    Installed transmission cooler

    Yes it is a mishimoto transmission cooler.
  13. Mikey59

    Installed transmission cooler

    No I took it off of the radiator .
  14. Mikey59

    Installed transmission cooler

    I mounted it where the ac condenser set
  15. Mikey59

    Installed transmission cooler

    I hope this helps
  16. Mikey59

    Installed transmission cooler

    The brackets are 1 1/2" x 3/4" aluminum and the top piece is 1 1/2" bent that's for the top bracket up 3" then bent to 1". I drilled and tapped 5/16×24
  17. Mikey59

    Installed transmission cooler

    727 no swap . Going to do an electric fan some time down the road
  18. Mikey59

    Installed transmission cooler

    It's a 727. No swap. I put it in front of the radiator
Back
Top