Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Just ran brake lines from rear to prop. Valve. But wanting to install a line lock. In-between the master cyclinder and the prop. Valve but not sure what size it is does anyone know size it is? It looks like is 1/8". Coming out of the prop. Valve to the rear is 3/16.
Just finished up on the rearend Dr. Diff axles with green bearings and inner seals , 742 3rd member alburn pois. New backing plates With new bearings and 3.91 gears. New bilstien shocks and bushings for the springs and new shackles. Just have to run new brake lines
I have a 727 trying to hook up the transmission linkage . Didn't take it apart. So trying to figure out .if the column shifter is in park where should the transmission control lever be after you hook up the linkages?
Iam looken for a set of bucket seats for 71 charger. Is there any other year and model that will fit this car? Like a challenger?does any one have a clue ? Iam going to gateway on 17 and the 18 on the hunt
Looked in some body manuals with no luck. on where to find the mounting hardware . Dont have a clue what its. Sorry it's on a 71 charger R/T super bee. Any help would be appreciated called
I have a 71 superbee that first had a 383 in it with air. But know it has a 440 but does not have air. Could not see any numbers on the radiator. Radiator does have cooling lines for trans.The shroud that i found in the trunk numbers was 2785435. 19079 . I'll take a pic when I get home from...
Going from points to electronic ignition Is your power in to the ballast resistor. Would that be key power? To run the new coil off of the new coil????
Is there different heads that came with 440 six pack are a 440 with a 4 barrel on it . Would it have bigger valves on the six pack over the 4 barrel ? And how would u tell the difference between the two . One would think that the six pack would have bigger valves than the 4 barrel. R there...
I have a 1971 charger super bee iam installing a new gas tank and was wanting to undercoat it to protect it from rusting. is that a good idea . And does any one know where I can get a book on parts assembly on my charger . My brothers car is in pieces and a lot of them I dont have a clue where...
Hello I have 440 trying to get oil in all the right places before I start it up. I know that u can Remove the distributor. Stick this tool down in there to run the oil pump to prime the engine with a drill does any one know where I can get one r due I have 2 make it? I know that a shaft out of...
Looking for this piece to get my hood latch working and the two clips also. Any clue where to get it. I've tryed classic industries but nothing. And been thing about switching out bench seats to bucket seats is that due able?