Search results for query: *

Still have to cut holes in the metal part of dash to fit them in, and I don’t find any reproduction vents, only old original. And big $ , too !

Putting a classic air heat/air unit in my 68 road runner. Been looking at the dash, thinking it would be “cool” to put the a/c vents in the factory air locations. Would take a steady hand with the cut off wheel and die grinder for the outboard locations, but the real challenge is putting it...

Thanks for the diagram ! Appreciate it !

Not sure that’s enough. Maybe for the valve covers ??? 25 foot pounds sounds right ! Thanks !

Changing my intake to a performer rpm on my 68 383 roadrunner. FSM torque is for a cast iron intake . My heads are still 906 cast iron. Since the intake is aluminum should the torque of the bolts be less ? The same as FSM ? Thoughts ?? Thanks to everyone for advice !

Well, mine are not post pandemic, but bought new from wheel vintiques about 2015. The chrome is still great. A few chips on black from changing tires 3 times since then. I notice no vibrations and I drive 70+ on the highway. Just my experience .

These require a flasher change ??

Did you change the flasher for these to work ?? I’m very interested !

It gets driven about 5-6k a year, so I suppose I’m just a little too cautious. Thanks for your comment.

I’m using RJ12YC plugs. Looks like a 3/8 reach, 13/16 hex. Have also used Bosch WR9FP,same reach and hex, which are NLA. Thanks for your comment.

I remember those, but can’t find any numbers that are 5/8 hex. Thanks for the comment !

I usually change the plugs in my 383 roadrunner every winter. Maybe overkill, but I hate to have issues on a long cruise to a show. It has old hooker 1 7/8 tube headers on it, and some plugs are challenging to change. I’ve been trying to research an equivalent plug,but with a 5/8 hex. Spent...

Did you change the glass setting tape the glass sits in at the bottom of the channel ? Could the glass be too low in the frame . Hard to raise the bottom frame on the vent glass up unless you take the whole window frame out of the door and try to move the pin up that is attached to the bottom...

I have PayPal, but don’t do the friends/family on it. Here’s what I propose…$50 on PayPal or Venmo and you pay the freight ? Thanks

Your under dash unit has heat, too ? Does it have any defrost outlets ? I like the idea of yours, but humidity here in the spring and fall need a defrost occasionally. Nice car and nice work, too !

I like the way it looks ! The under dash unit is from Vintage ? All the a/c parts from Vintage ??

Ive heard the knee knockers cool great. I can swing the behind the dash complete unit, ($)… just seemed more work, but likely better in the long run. Thanks for answering !

Thanks for answering. After more measuring, the under dash unit will extend into the passenger leg room quite a bit. It has to be to the right far enough to clear my shifter, and that puts it mostly into the passenger leg area. . One reason I considered the under dash was it’s so “ Analog”. A...

I would appreciate some input before I pull the trigger on A/C for my 68 roadrunner. 95+ % the driving is above 50*. i rebuilt the heater box completely, blasted the metal, new paint, foam, motor, core, etc. it works great. Maybe turned it on low once for some wife’s morning chill in late...

No other crack or broken tabs other than the one shown ?