Search results for query: *

I am in process of tidying up my center console on my 69 Charger and have a silly question. My console door is loose and wobbly, I found that 3 of the 5 studs holding the hinge to the door lid are stripped. does anyone know if these studs are replaceable? I found the acorn nuts on mega parts...

Gents- I am looking for some friendly input. I am at the point of painting the engine of my 512" build. It is E440 that received a stroker kit from 440Source, has aluminum heads and RPM Performer intake and a big Holley on top. 2" Tti headers as well. So..... clearly not stock. I also have my...

Hello everyone, Getting ready to redo my gauge cluster. I purchased an OER tic toc tach a while back, but honestly, I am having second thoughts after doing some additional research. In as much, I am now looking to acquire an original in nice shape or one that I could send out to be...

Looking for a clean and solid 1969 Charger body and frame for a total resto-mod project. Motor/trans/rearend/interior is unimportant. Just looking for an extremely solid starting point. No rusted-out carcasses please. Thank you FBBO

I am approaching unfamiliar territory and hoping for some guidance from those I consider experts here on FBBO. I am nearing the completion of my 512" engine build and preparing for the dyno. I have purchased an Edelbrock Performer RPM Intake for this as well as an Aluminum Holley dual feed carb...

Looking to buy (a) Hemi valve cover or a set. As you may have guessed, this is not for an engine, but a project of mine. They or it doesn't have to be perfect but needs to present well once cleaned up. Year/type/style is irrelevant. So, if you have that one valve cover sitting around you want...

Hoping to score an original Alternator, period correct, for my 69 Charger RT. As listed, non AC, single groove. Also need brackets and hardware. Hoping to link up with someone going to Carlise for easy transaction. Thank you!

I am interested in a performance set of plug wires (8mm) or so, that have the general appearance of stock at a distance. Any suggestions?

Hello everyone! I am still hunting a nice set of 1969 BB valve covers. Hoping I can purchase of someone heading to Carlise so easy transaction. Can really use the help as my engine is nearing completion and want to get these purchased ASAP. Thanks for looking, Gracias +6

I am in need on all BB pulleys for a power steering, non AC car. I also need a water neck housing, dipstick, fan and valve covers. I am specifically looking for original valve covers, fan and dipstick. Please PM me if you can assist. Gracias

So..... Today I am applying POR 15 to the metal components underneath my trailer. I exercised caution, gloves and eye protection with an outdoor application. All was going well until, I dropped the quart of POR 15 directly on top of myself. I was in an area without soap or water handy, and now I...

Thinking of reaching out to Pete about an engine build, anyone know him personally or first-hand quality of work as a reference? Watched tons of his YouTube vids and he seems very impressive. Hoping he may even be amongst us on this site.

I recently took my 69 Charger out for its spring shakedown run, went about 20 miles in total. Roughly halfway through, I heard what I can only describe as a "growling" sound coming from the rear of the car. I was likely traveling over 65 MPH, I left off the throttle and it lasted a few seconds...

Can someone please direct me to where I may find the tool that is used to remove the OE radiator/heater hose clamps? I am tired of them slipping through the jaws of my channellocks. Any help/direction would be appreciated as always :lowdown:

Need help/guidance! In preparation of installing my recently Glen-Ray restored radiator and repop shroud in my 69 Charger, I purchased a hardware kit from AMK for securing the radiator and shroud as I wanted correct fasteners. In comparing the new bolt kit to the stuff I removed, several of the...

I am in the midst of putting together a 440Source 512" stroker. I am looking for advice on ignition box recommendations and as close to possible OEM looking distributor. I have zero intentions of ever running this car at the strip, but certainly running it through the gears on the street in an...

I am considering 2" TTi headers for my stroker build in my 69 Charger RT. Anyone have any experience with fitment? Mine is a 4-speed car, 11" flywheel, Tremec 5 speed. I see other threads speaking to alignment of the headers, but I'm primarily concerned about shoehorning it in there, and starter...

I noticed several threads regarding the Tremec TKX trans and do you need to cut the car up or not. I researched that issue enough (for me) that I ordered my transmission and required components yesterday from American Powertrain. The one burning question I have, is a simple one; and likely been...

I am in the midst of a 512" stroker build for my 69 Charger RT. As I begin working through ordering parts etc, Do those of you in the know suggest a steel bellhousing? I.e Lakewood? The engine is projected to put out north of 600Hp, but will not ever or at least minimally ever see the drag strip...

I have begun to search for my beloved 69 Charger RT as stated above. I lack VIN# and/or documentation. But I am hoping by virtue of where I sold it and some liberties, I took with the car, someone may know a direction to point me in. First off, it had a bored out 440 Six pack with an automatic...