Search results for query: *

Alright guys and gals. been a little bit since ive been with you guys here but Im back and need some help! Been trying to skate around it for a couple years now but finally got to get it taken care of. can't get an inspection sticker cause the wipers don't work. I believe it's the wiper motor...

At a loss and don’t know where to go from here…. A lot of you were following my 4spd swap. 65 Satellite 4spd swap Still chasing a vibration. I notice it from 25-65mph. Vibrates when I’m cruising and I push the clutch in and hold the clutch in or if I pull it into neutral while cruising and...

Read through a couple of the threads but didn’t see the same thing. Issue: I have an odd vibration (bad) that I can’t find. If you’ve followed my garages you would see that I’ve been putting together my 65 satellite for the last couple years. I conveyed to a 4spd this winter. When driving at...

Hey guys. After converting my 65 Satty to a 4spd I wanted to go with a 750 double pumper and swap out the 750 vac secondary that I had. I ended up getting this summit racing 750. Was told it was a rebranded Holley 4011 from back in the day. Well after swapping out power valves and jetting to my...

Hey all. My 440 has been built by a previous person who is no longer around. I have no docs on it other than what I’m “told” about it. Most of the info seems to check out. How do I find out the cam that’s in it? It sounds like a solid cam cause it’s got the “sewing machine” sound. I want to...

Hey all. I am in the process of doing a 4spd swap to my 65 Satellite (check out my garages for full details) and I just realized that my current starter is pretty tight in the headers. Now this car had the headers on it when I got it with this starter. It was an auto and I didn’t have any issues...

Hey all I need some help! I read through some of the other posts and couldn’t quite find what I’m looking for. Some of you may be following my photo garage 4spd swap. I just ended up purchasing a new z-bar and the correct bell housing pivot ball stud. After install the correct parts, I now...

I searched the forums but didn’t seem to find what I was looking for. The interior is out of my car currently while I cut the floor for the 4spd and repair the floor in spots. I plan on keeping the original front buckets and back seat but they all need new foam and upholstery. I want to put a...

Ok guys, hoping you all can help me out. Im lost on this one. Heres what I got. Ive run out of gas several times in my 65 Satellite cause the fuel gauge doesn't work. Decided to take a look and see what I can find. The gauge reads empty with key or or key off so I pulled the wire off of the...

I read through some of the other forums and didn’t see anything that helped. I recently converted my 65 Satellite to manual front discs. I used the Right Stuff Detailing disc brake kit which came with the 15/16 master cylinder, adjustable pushrod, adjustable proportioning valve, spindles...

I searched the forums but didn't seem to find what I was looking for. I recently converted my 65 Satellite to front discs and swapped out the old single reservoir to a dual reservoir. I bought the whole kit including the master from The Right Stuff. I also purchase the full steel brake line...

I’ve got a set of 14x6 torque thrusts with center caps. Converted to disc brakes and wheels don’t fit. They have Firestone Super Sport redline bias ply tires in good shape. Some start of dry crack on sidewalls. Drove on them all season last year. DOT CYLFF4154501. Asking $500 b/o plus shipping...

Hey guys So I purchased the complete PST front rebuild kit along with the PST front sway bar. My 65 did not have a sway bar from the factory and I knew I was likely going to need to weld/bolt brackets on but I’m super confused. The kit uses an L bracket that goes to the lower shock bolt which is...

Hey guys. So I am in the process of putting my front end back together. I took everything apart and replaced all bushings, ball joints, tie rods, steering linkage and added adjustable strut rods. I have factory 777/776 torsion bars but I don’t know how to clock the torsion bars correctly in the...

Wow you can really lose track of time reading through these forums! Lots of great info and sometimes can be overwhelming. Figured I would ask in the 62-65 forum... I am currently in the process of doing a complete front end and rear end rebuild on my Satellite. All new Polygraphite bushings...

Hello all. I must admit that I have been reading the forums on FBBO for about a year now and finally jumped in and joined as a member. There is so much great information in here and looking forward to diving in. I had a 65 Belvedere II that I put together about 20 years ago and sold it, in a...