Search results for query: *

Hi all, Reassembling vent wing assembly after taking it apart to have the chrome wing portion rechromed. Ground off the rivet during disassembly, and watched a video where 3M Weatherstrip and Gasket adhesive was used to fuse the chrome wing back onto the triangular vent frame. Didn’t work for...

So, I’ve looked through the parts book with no success. and went ahead and ordered David Wise’s Reference book. In the meantime, can somebody tell me which hardware is used to attach the center console to the cap and extension on the rear? 4 holes. TIA

Brand new, only had tires mounted for fitment check, but never used. Selling only the wheels. Listing Title wheel width is incorrect. These are 7’s and 8’s. (2) American Racing Chrome 18x7, 5x4.5 (5x114.3), 0 offset, 4” Backspacing. (2) American Racing Chrome 18x8, 5x4.5 (5x114.3), 0 offset...

Need a 1966 Dodge Coronet 22" OEM or Reproduction Fan Shroud Thanks, Daniel

Looking for a 1966 Dodge Coronet steering column bearing/support, #2660140. Body shop disassembled my steering column to paint, and lost some parts Thanks, Daniel

I have a '66 Coronet with power steering. Anyone know if the '67 column will work? I know the '67 column is collapsible. I like safer.....

Hi all, I have warped hubs from someone improperly separating the hub from the drum/studs. 1966 Dodge Coronet. 10 x 2 1/2” I have found two drum assemblies nearby, but would prefer to find the hubs already separated in good shape if possible. Atlanta area. Thanks! Daniel

Finally, my ‘66 Coronet 500 goes to paint this week. My painter is having difficulty finding a formulation for 1969 B5, even with the paint codes I have provided. Anyone have the formulation from a recent experience painting this color, from this year? Believe the 1970 formulation was the same...

Taking the lower switches out for dash painting (light, wiper, flasher, ignition). Got the ignition switch out already, but wanted to verify the procedure on the others. I read that on the light switch, there’s a button to remove the post. Front bezel is rotated with a needle nose pliers in the...

Need to remove lower dash trim for repair. Just verifying there’s a nut on the backside of each stud, and one needs a long socket extension to reach from under the dash?

Hi all, Just found out my stock 16” two spoke steering wheel on my ‘66 Coronet is not repairable. I know there is a repop, but two vendors have told me there are problems with fitment at present. So, looking at aftermarket. I like the Forever Sharp wheels, but their selection of 15” wheels is...

Anyone know who might sell the black rubber bumpers that reside on the top of the vent window frame? '66 Dodge Coronet 500. I have searched, but cannot find anyone selling them.

Has anyone, with an item of chrome trim, i.e. vent window frame on a ‘66 Coronet that is not available as a repop, considered chrome vinyl wrap in lieu of complete disassembly and chroming? I have removed the glass from my vent window frames, and cleaned as best I could, but there is quite a bit...

Hi all, Just ordered Torq Thruts II's for the Coronet, which is currently at the body shop prepping for paint. I was planning on replacing the left hand thread lugs, and then wondered if the new wheels, which are replacing the stock steel wheels with wheel covers, will require lugs of a longer...

My ‘66 Coronet 500’s arrival is delayed another week due to the iced roads in Texas. Was planning to purchase a serpentine pulley system, but things have become complicated. Updated water pump switches lower outlet side, which minimizes the radiators I can use. Does anyone have the measurement...

Hi all, Just took possession of a 1966 Dodge Coronet 500 that my dad purchased new. I was lucky enough to go with him on delivery day in October, 1965. It's been in the family the entire time, and now I'm planning a restoration. I reside in the NW Atlanta suburbs, so looking forward to meeting...

Hi all, New member here. Just took possession of a '66 Coronet 500 that my dad purchased new in October, 1965. Was passed down to one of my brothers in 1969, and it's finally made its' way to me. Fond memories of picking it up on delivery day as an 8 year old. Car needs paint and interior, and...