Search results for query: *

thanks guys , it ended up being a few not great grounds . sometimes the obvious escapes me

ill check it , thanks for the response

Hello , back again for a little more guidance , I tried looking for a similar problem in previous threads and cant find what i am looking for so I will try here , I have a 1969 Plymouth sport satellite 318 auto on the floor factory ac car , the problem I am having is ( previous owner "fixed some...

I'll load some up next time I work on it maybe someone will have some ideas ,

Ok I need to do some more work on my end , the lid sits good on the right side gap wise and on the road side the gap along the quarter is ok but as it gets closer to the rear light then down towards the bumper it actually over laps the light housing about 1/4" or so , something else must still...

I'm not sure what you mean as the cove area , if you can clarify that I'd appreciate it , I have found many people call the same thing by different names depending upon where they are from so I don't want to assume. Thank you

I am starting to slowly restore my 1969 plymouth sport satellite, the rear of the car has been hit in the past I removed the rear quarter to change it and new trunk floor and extentions , before everything gets welded I tried to close the trunk just for a visual and it seems to be way to tight...

I have a new valve for my heater, I have a 1969 plymouth sport satellite 318 factory ac and I have the new heater valve like the one in the picture EXCEPT the face plate the valve attached to that allows it to be bolted to the firewall is missing, any ideas who has these ? I'd rather not buy...

pnora i did have it grounded i removed it for the photo , Ron_m ill give this a closer look , thanks everyone ,

I did contact them and I am waiting for a response, just figured id ask here since everyone is helpful, thanks for taking the time to respond

the condenser wire is in the center plug of the limiter

So I have a 1969 Plymouth sport satellite I've been trying to upgrade since I recently bought it , the last owner " fixed the wiring " I replaced the broken circuit board , bad amp , fuel and temp gauges . I also installed the ivr-4 limiter , the temp sensor is new and so is the fuel tank and...

i had a quick minute and here are pictures of both sides , as I've said before this is my first Plymouth so I am not sure what belongs and what doesn't ? I did see that you can buy bolt on pointers but they all appear to be for big block , does that matter for this particular application ?

thanks for all the information , this is a early 1969 / late 68 is what i was told by the previous owner , ill check out everyone's advice tonight and recheck all the locations . thanks again for the help

I just bought my first Plymouth 1969 sport satellite factory a/c with a 318 I was trying to find the timing pointer but cant seem to find it ? some pages I look at seem to suggest its molded into the timing cover other pages seem to say it should be on the passenger side of the car and it bolts...

Right now this is the only one I have

Hello , I am a first time owner of a plymouth I bought a 1969 sport satellite with a 318 , runs great needs some " tinkering " hopefully I'll get help as needed from the members here Thanks on advance Bryan R.