Search results for query: *

Hi Big Wiil I have one

This set Still available- I had 2 sets

Set of Holley crossram carbs 770 cfm vacuum secondary I used these for about 100 miles- they are really almost new. These were recently produced. I put a set of adjustable metering blocks on here so I could adjust the idle restriction in the circuit. Im also including the original metering...

Hi 2 blader I saw some engine cradles for sale on CL in denver for a hemi cradle

Hi 2blader I saw a couple hemi engine cradles on EBay

Fastcap Onslaught is excellent IMHO

Hi Joe Id do a general tuneup , check initial timing and total advance . Hows the carb setup on your new machine? Good luck with it JD

2 sets cross ram velocity stacks One set is in good condition purchased from Ray Bartons shop. The second set is fair but would clean up with elbow grease. Not sure of the source on the 2nd set - they came in the trunk of a car I bought. $350 for both sets shipped lower 48

Set of Holley crossram carbs 770 cfm vacuum secondary I used these for about 100 miles These were recently produced. I put a set of adjustable metering blocks on here so I could adjust the idle restriction in the circuit. Im also including the original metering blocks . These were used to...

2 modified 770 cfm Holleys for a crossram. Gary Williams Carburetors built these for me a year ago. These have been modified to have a 4 corner idle and have dual metering blocks (vs the normal metering plate). Im asking $1250 shipped which is much less than the cost of Gary’s work. Yours...

Yep thats the critter

I have seen reproductions of those for sale though they were quite expensive- I can go scrape up the link if you want me to ? I mean the reman jobs were about $2k-

Let me know what parts you need. I have some spares. Thanks JD

Hi Steve I have that setup but I added a fuel pressure regulator to keep those Holleys from over-filling.

Hi Carl I have a spare set of NOS carbs (Holleys) for the crossram that I used for about 6 mos while my originals got rebuilt. Let me know if you want any info. Thanks, JD

Ernesto just a couple things to check (you likely did already but ..) Did you check the accelerator pump actuator clearance? E.g. when the throttle is moved do they actuate? Also wondering if a bit more accelerator cam for the pumps?

When does it surge Ernesto?

Hi Ernesto! She’s running good now! I have a bit of front suspension work to do (strut bushings oh boy) but otherwise shes road worthy! Let us know if you see anything cool at that show. Weather will keep us indoors I think this weekend as we are dealing with the back end of that hurricane

Hi Ernesto! The Coronet made it to our local cruise in and is running good! Hows by you?

Yes Sir Sent you a pm with tracking Its on the way