Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
So I installed my steering wheel column to ensure I had all the parts and for fitment. However, the steering wheel is just too close to my chest and my elbows bent to far as well. I've double checked the seat rails, they move freely and all the way forward and back. I've attached several...
No, They are the same size. It appears the brake setup takes to much space because of the thickness of the rotor and other components to connect the calipers. I'm just asking the question because many people here have modified their B-body to four wheel disc brake. Perhaps they have experienced...
The lug nut are only there to hold the rim so you can see the rim center hole does not go over the center hub. I'm going to use tapered small nuts. Imaged attached.
I installed the following 4 wheel Disc Brake Conversion Kit. The Right Stuff 1962-72 Mopar B/E-Body, 8" Booster, 4-Wheel Power Disc Brake Conversion Kit - (MDC42DC-P)
I purchased the following rear wheel rims. https://www.classicindustries.com/shop/all-years/dodge/coronet/parts/?q=MW860
I am...
I received my leaf springs for my 1970 Bee however, one side has 7 leafs springs while the other has only four. I checked my originals ones and both have five. The car was an original 3.23 open diff however, now it is an 3.55 posi. Can somebody help?
I thank you all in advance,
Ed
I've been restoring my 70 Bee for about ten months. Here are some pics of the build progress. Additionally, I would to say thank you to all of you for your help. It has definitely helped during the build.
My current one is just like the first one as you indicated. I don't know if the second will work. If it does work then I don't have a problem not being a Bee trunk lid. You will only notice that difference when you open the trunk. Everything else appears correct.
I need to buy a trunk lid for my bee however, I notice a difference on two of them on eBay. Underneath one of them has a hump in the middle and the other doesn't. Which is the one for a Superbee.
I bought some seal power pistons and my ratio should be 9.5:1 however, my ratio is around 7:1. The pistons are not coming all the way up (Short about 1/8 inch). Can somebody tell me exactly where to purchase an OER set of piston?
I thank all of you guys in advance,
Ed