Search results for query: *

Car stopped running on me. Poured a bit of gas down the carb and vroom! she started right up. OK, new fuel pump installed, still not pumping gas. Fuel bowls are empty on carb. Took out the fuel pump rod and it measures 3 1/16 with a tape measure. Don't have my calipers, so this could vary a bit...

I have a 66 Belvedere with a 440, MSD ignition system. Couple of weeks ago I went to start it, it had been driving perfectly previously. Turned over, started to run, died and now it hasnt started since. Made sure it had gas. Today Checked the spark. I'm getting spark to the plugs but it's a...

I have a pushrod ticking. 440 RB. The pushrods/rocker arms are the ball/cup type. #1 exhaust pushrod has almost an 1/8 inch of play when the lifter is on the base of the cam lobe. Do I need to pull the rocker shaft off to see if I have hydraulic or solid lifters? If hydraulic, is it ok to just...

I am trying to track down a small leak in my 66 Belvedere II. Is the oil level high enough to leak out of the rear main seal when the car has been sitting in the garage for weeks? Or do they leak mainly when the motor is running? Before I took it out last weekend I noticed an oil spot under the...

My recently purchased 66 Belvedere II has a Holley 4150 without a choke. I have to start it and stay with it for 10 minutes at least before I can put it in drive without it stalling. I'm guessing it was setup for racing or warm weather only driving? I dont know alot about this car and cannot get...

Just wondering if the 66 + 67 Belvedere II hood ornaments are the same? I need to change mine from 383 to 440 and most of the ones I see listed are for 67, at least the new ones anyway. Can I use a 67 ornament on my 66?

I’m having my 727 rebuilt as we speak and I wanted to know if the numbers stamped into the converter tell me anything about maker or stall speed. Just bought this car and I’m transmissionally uneducated.

Hey all, thanks for accepting me. Long time Mopar addict here, I had to feed the need since I had been without one for over 30 years. Just purchased a 66 Belvedere II with my son. 440/727/8 3/4. Not much of a project, it's pretty complete. But I said after the last "project" there weren't gonna...