Search results for query: *

Got something cool for you guys to check out today. I bought this block apart of a deal a few months ago from a gentleman who has had this block in storage for years... He purchased it from a shop in Tampa, FL I believe back in the mid 80's. Other than that it is unknown on the exact history of...

1966 Coronet 4 Door Part Out Originally 318 Poly; Automatic; 8 3/4 Car The car was in an front end accident sometime in its life, previous owner put a 67 Coronet front end on it. This was an A/C car with most of the A/C equipment still intact and installed on the 318 Poly. I also have a complete...

All crankshafts have been stored inside for years. I would recommend bringing to a machine shop to be checked prior to install. All cranks are in good shape and just need to be cleaned up. Most of them have been coated with oil and were in plastic bags that disintegrated. I will ship, however...

1966/1967 Coronet A/C Complete Dashboard Removed from a 66 Coronet Complete assembly with wiring harness, radio, etc A/C Dash **I will be at the Don Garlits Museum for the "Mopars with Big Daddy" Show in Ocala, FL during Nov 3rd and 4th if you would like to pick parts up there!** $440 obo...

1965 383 Bare Block Measured @ 4.250/STD Bore No Main Caps... Aftermarket caps can be bought, but it all depends on what you want to use the block for... Next stop is the scrap yard if no one can use it, figured I would attempt to sell in case anyone has a good use for it. Stamped Pad - A383; 1...

1973 440 Big Block Mopar Measured @ 4.350 (.030 bore) Truck Motor Does NOT turn over 2 cylinders are showing excessive damage due to rust/pitting. MIGHT clean up at .060 or will need to have new sleeves installed... I can provide more photos if needed. Casting Number - 3698830-440-5 $300 obo...

1969 383 Big Block Mopar Removed from 69 Roadrunner Standard Bore; Measured @ 4.250" Stored inside for years Does NOT turn over, cylinders SHOULD clean up to .030. I can provide more photos if needed. Stamp Pad - E383; 11 272; HP Casting Numbers - 2468130-8; LL Stamped VIN - RM23H9A176585 (69...

1977 400 Big Block Mopar Unknown miles Great start for a stroker build Stored inside for years Does turn over freely Bore measured at 4.340 STD Stamp Pad - 7T400; 6 14 2; E Casting Numbers - 4006530-400-3 **I will be at the Don Garlits Museum for the "Mopars with Big Daddy" Show in Ocala, FL...

Trick Flow® Phenolic Carburetor Spacers TFS-2145001C - NEW NEVER USED!. To be used on 4500 Dominator applications 1" Spacer with the "cloverleaf" pattern FREE SHIPPING ANYWHERE IN THE LOWER US 48 STATES! $60 shipped; Located in North Port, FL. Paypal accepted.

Set of Rear USED QA1 Double Adjustable; "Stocker Star" Shocks Kit comes with a new bushing set for upper and lower mounts on each shock. Both function as intended. 18 modes of adjustment on rebound and compression. ** 23.870 in. Extended ** 14.870 in - Collapsed Originally on a 67 Coronet with a...

1966-67 Dodge Coronet Front Fender - Passenger Side - DECENT SHAPE, Emblems and trim are all included. Backside of fender does have some rot near the upper splash shield mount. Headlight buckets are welded to the fender and will be included. $175 obo Local Pickup ONLY... Located in North Port...

1966-1967 Dodge Coronet/Charger Hood - Included DODGE Letters and TRIM! Minimal rot pictured above near the front underside of the hood. All other rust is surface and easily fixable. $325 obo; Local Pickup ONLY... Located in North Port, FL 34288. Let me know if I can answer any questions.

1966-1967 Dodge Coronet B-Pillar Metal Replacement - USED Recently removed from a 1966 Coronet 4 Door, this also MIGHT work with the Wagons... Not sure. All spot welds were drilled out and ready to install in your car! Included the attached door hinge. $125 each/$200 for the set obo. Located in...

1966-1967 Dodge Coronet 4 Door Sedan Parts COMPLETE SET OF DOORS! They are all ready to install. Included door handle, trim, interior panels, glass, window regulator, door hinges and hardware... Various dents/scratches are in each door, minimal rust is present on the bottom of each door. $400...

Moroso 63848 - Big Block Chrysler Vacuum Pump/Front Mandrel Drive Kit. Fits any factory/Chrysler style 6 bolt front harmonic balancer Included various spacers, bolts, and pulleys to run an alternator/vacuum pump/dry sump setup. Kit is BRAND NEW and used only for mocking up purposes **Note: Kit...

Hey guys! Just got done building a new 505 for the Coronet... My last block decided to crack a cylinder wall after sitting for 3 years... So, I made it out to Bradenton Motorsports Park two weeks ago for the SFG $20K/$50K to win 5 day race. Only raced Tues and Weds. The car did OK this time out...

1966 Dodge Coronet 4 Door SE NO TITLE Cheap MOPAR Project Included: Front & rear windshield All 4 doors & side glass Rear decklid 4 wheel dolly for loading onto trailer/moving around shop Misc small parts... The car does have some roof rot (pictured) and will take effort to fix. $599 obo...

66-67 B-Body Door Handles Just took off my 67 Coronet... Seeing if anyone has a good use for them. They function as intended, but the chrome is pitted & scratched and in poor shape. Located at North Port, FL $40 shipped anywhere within the US

67 Coronet Hood Worst Rust is shown in the corner picture. Located in Orland Park, IL 60467 $150 obo

440 Rebuilt Rotating Assembly, bought as a part of a short block... Story is that the engine was assembled for a customer, customer didn't pay up, and the motor sat in a shop for a while until I bought the short block. I took this rotating assembly out as I had no use for it. I have been told...