Search results for query: *

For sale 1965 Dodge PROJECT Coronet 440. Original 318 poly rebuilt with about 20,000 runs great. Transmission is an original 727. rear end 8 3/4" . Glass all good, stainless trim Very good shape. Fuel system has been redone, new stainless steel gas tank, fuel lines, fuel pump, and carb...

Thank You Doug Now thats good info. My spring may Not be broke . Now days nobody has worked on these cars

cable is free to move now but mechanic said spring was broke. Looks to me like the spring has a double bend that attaches to nothing. Making the cable not work properly. ANY suggestions would Greatly be helpful. Tks

I dont have anything now. Just not many options out there. I need the entire assy, cable , housing and GOOD spring.

G Day all, Is it possible to adapt the original 727 column shift to a floor shift? Does anyone make a kit for this? any thoughts? Tks

G day all, Looking for a "park cable" for a 65 coronet with 727 colum shift. My cable was stuck but while removing it.... the spring got messed up. My cable is the shorter of the two it measures appoox 27 1/4" from bracket to housing. pt# on housing is 2400062 11 below. Tks

Shop told me it was locked up and would not move. Myself..I never had a setup like this. I should add...the car has not ran since 1990. Seller says engine has about 20-25000 on a rebuild 318 poly. New tank, fuel lines, fuel pump, carb ,Hei ignition kit and engine runs Great. He parked it...

I dont think that are misleading me...I think lack of knowledge on their part

G day all. I have a 65 coronet with original transmission. The shop told me my park cable is not moving....there fore when hooked up , colum shifter wont move. They said the gears were shifting but park cable wont move. Does this sound like a common problem? ANY help would assist greatly...

its the top bolt on the hood. The bolt is still screwed in the nut 1/2 way then the nut broke loose. Im thinking of removing the other bolt on that side....(cut off bolt) then lifting the hood up and blocking it up on that side. My hole im thinking would be on the Outside of the original...

G evening, I was putting in bolts for the hood and the nut broke loose with the bolt half tight. After cutting bolt off........ I was thinking of cutting a slot from the outside of the hood and slide a piece of steel strap with a nut welded on. start bolt.. then weld strap in...then fold...

Is the front bumper on the 4 door for sale? What state are ya from?

Tks for your time. Thats what I come up with. My Thermostat housing on a NON a/c model aims fwd and up. The a/c model shoots to the drivers side. I think that hose is for the a/c model. I brought it home and it will not work.. others look like a "L"???. It needs to go backwards from...

G day all, I trying to find a upper radiator hose for my 65 coronet 318 poly. I using a NON A/C thermostat housing, points forward and up. Do a/c and non a/c cars use the same radiator? The hose's out there dont look like they would fit. The local parts store dont have anything close to...

Thanks All. My wiring was a mess. No coil and wires with no ends. Alt wires missing ends. Will you continue to use the resistor? Some say put a wire in back and hide it...??? Some go to the switch...I like Simple and reliable. So a good choice would be use the positive side of old coil...

Im installing a GM style HEI in my 65 coronet. I need a hot wire from some where? Where is the best place to bring the wire from? What to do with the existing coil wires? Im not looking for a "factory" look just reliabllity and smmoth preformance. Tks

For sale 2 new Weld Star lite 15 x 8 for Chevy. Have caps still in box's. Wheels cost 350.00 each new. These are older wheels that have only 5 holes. 500.00 OBO or possible trade for equal value...LOL Tks Dave

have you ever shipped a trunk lid? Im scared to ask what shipping cost would be. My zip is 66861 TKS Dave

How are the bumpers? Does the emblem go with the trunk?

WTB Nice front bumper for 65 Coronet. TKS Mid Ks 66861