Search results for query: *

talk to Danny at pro-bilt transmission. He'll point you in the right direction.

The last two weeks, got the master cylinder replaced, alternator aligned correctly, installed the newly rebuilt power steering pump and box, painted intake and manifolds, cleaned engine bay, painted the new alternator (130 amp)(spare). Also found a power steering return hose that works perfect...

Had one awhile back on a 440. Stay away.

Is there enough material to open the hole size?

Could you post a pic of the webbing? Has it been sonic checked?

The 3 necessities go on the first pulley, the option goes on the second.

Lower control arms if they have sway bar brackets

You were right, the Saginaw pulley is narrower. Does anyone make one that will work?

Next 1000 on my engine will be Holley sniper

That's good news, mine is too. Guess I'll get the brackets and see if the outlet interferes when it's hanging. Did you buy a reducer for the return line, or does someone make the smaller fitting port you can bolt to the box?

Thanks for the info. do you know the distance between the two mounting holes on your waterpump housing?

I've got a new one I don't need. 18 snaps I believe.

Hi. I've got a 67 gtx with a 67 440 (stamped 3-17-67) with power steering. I've got a trw pump on it now. The steering box started leaking so I figured I'd take it out to rebuild it and change to a Saginaw pump while I'm at it. I got one with brackets out of a motor home with a 440 (later...

Noticed an off-idle hesitation the other day so ordered a Holley rebuild kit. Figured I'd drive it around the block today then pull the intake to repaint and rebuild the carb. Went to start it, crank crank crank no fuel. Looked down the carb, no spray. Guess I got the kit just in time. Just...

Thanks for the info. I bypassed my crossover for my tweeters so now it goes head unit to equalizer to amp, and the whine is barely noticeable. So the crossover was just amplifying the issue. Back to the thread though, my whine happens when the car is off as well, so my firecore 50's...

Could you give some more detail of your sound system? I have the firecore 50's and am currently chasing a nasty ~10khz whine that i thought was being produced from my active crossover, but not sure what is inducing the noise. Do you have everything grounded to one point, multipoints?

Need an instrument cluster

Could i get a picture of the 67 tail panel?

Should be 5/8". I went behind the counter at autozone, and picked one with a u bend.

I used an alt out of an early 90's ram. I think its 136 amp. Grabbed a pulley off a dakota. Then i got a sunco voltmeter from autozone, disassembled it, drilled two small holes in my ammeter face, popped out the ammeter, screwed the voltmeter in place. You would never notice. Put all the...