Search results for query: *

We have installed all new harnesses and dash harness with new fuse box but can not seem to find the mounting location can someone help with photos or let us know where to mount it. It has one screw location on the plastic fuse box and two little plastic tabs sticking up about 1/16" of an inch...

After reading articles about people having trouble assembling the steering column switch housing I thought I would give some advice. This procedure is having the complete column out of the vehicle. all parts must be removed from the column, then assemble the switch housing to the inner tube via...

Can someone please help me with a problem. We installed a new dash harness. There are two black wires near the headlight switch. The schematic says rotating headlight switch. Does anyone have a photo of this switch or have one for sale? Apparently a previous owner took it out because there is an...

WTB 1964 Hemi K heads. I just picked up a really nice set but one head is cracked in the combustion chamber and I don't trust fixing it. I need one good head but will also take a set if anyone knows where I can find them. Any help will be greatly appreciated. Thank you: Stan

Looking for a good set of 1964 or 1965 Hemi K Heads. Also lookng for valve covers to fit K heads. Thank you: Stan

I have a 1965 A990 block and I'm looking for a good set of 64-65 Hemi K heads with no cracks or damage. Either cast or aluminum will do. Thank you: Stan

I bought this Hemi block and it has never been bored,decked,windowed or cracked and has been completely checked out. If you guys can help I.d. this block it would help me understand the history behind it. The casting date on side of block is 5/4/64 Thank you: Stan

I have a 1964 dodge 440 2 dr post car rolling chassis. the car has some floor rust and a little in the cowl area. I have all new metal for the car. wheel well openings still in boxes. Lower quarters still in boxes. I have a set of Arizona mint front fenders to go with car. kramer auto just cut...

I'm looking for a correct date code 1964 hemi crossram intake manifold. If you or anyone you know has one pease contact me ASAP. Thank you: Stan Sawyer

Looking for a 1964 Hemi block for a reproduction of the original HEMI-WAGON. The project is in progress and we are looking for a good used hemi block, 1964 hemi heads and 1964 magnesium crossram. If you have any of these items they would be used for a project that would be preserving a part of...

I/m looking for a good rebuildable set of Carter AFBs 4762S Dual quads. If anyone has a set please let me know. This is for a crossram set-up. Thank you: Stan

I have seen so many different jetting schemes out there. From what I have seen the one carb has straight jetting the other carb has staggered jetting but the articles say left or right carb. I need to know drivers side or passenger side and how much stagger in jetting on the secondaries. It runs...

I live in Pa. and I'm looking for a good set of 1964 dodge 330 or 440 front fenders. I'll take any options but hopefully somewhere less than 8 hours away for customer pick-up. but all that have any please contact me. Stan

I have a 1964 dodge 330 post car. Im looking for the trim that goes across the very front edge of the hood from left to right. I'm looking for a good one that can be polished and has no bad dents or dings that cannot be repaired. I hope someone can help me find this part...

Here are the motor Specs. 512c.i. 440ci block bored .055 for a total of 4.376 bore Align honed and decked .010 Heads are Victor 440 77929 port matched, bowl blended, and pro valve job, valve job as delivered was horrible 440 source 512 stroker kit with big block chevy rod journals Pistons are...

After finishing my friends 512ci cross-ram engine We decided to replace the Orange Box with a chrome box ignition. Installed new box and new Year One wiring harness. The car ran pretty well after tuning the carbs for a few hours. When we were convinced the tune up was sufficient we parked the...

My friend and I have been working on the installation of an AMD floor pan in a 1965 Coronet 2dr Post car. We were told that we would have to cut out the post to get the pan in the car or cut the pan in half down the middle through the center hump. News flash, we measured the pan and the door...

looking for a good radiator part No# 2445635 for a 1964 dodge hemi.

I'm looking for 1964 dodge 2 dr. post sedan door panels front, rear, or any

I have searched high and low all over the internet and have found almost no information on 1964 dodge 440 post cars, for instance production no# and what engine combinations were available. if you have any info please respond. Thanks Stan