Search results for query: *

Did you hit your head again Bryan? How long di it take you to sell the last 50?

The police will always take your guns when you are involved in a shooting incident and keep them while the investigation is ongoing. That is why you always want to have more than one weapon, that way your not left defenseless when the family/friends of the person you just killed show up on your...

Take that down to get it registered and see what it really costs. There is a reason people put "Not for Hire" on the side. Its cool but I could not afford it. I also wonder what insurance would run.

Pictures of your setup will also help greatly. Are you running a anti-colapse spring in the lower rad hose? What Thermostat are you running? Is it a AC car? Does it run hot or is it actually boiling over? At this point we are going to ask more questions than provide answers so please bare...

Look for a local custom trailer builder or RV supply store. Also if you have a local iron supply business you can get square tubing and angled iron from them. I also made my own and bolted it up to the frame where the transport hangers use to be connected.

Converting is easy. Just take the wires loose from the Amp gauge and connect them together. I took a insulated ring, connected a wire to it then connected all three wires together with a small bolt and nut. I covered the bolt and wires with some heat shrink tubing I slipped on before...

I did the graphics on this car using Windex and removed them after 5 years and had no issues with the paint surface. I'm not sure about using simple green since its more of a detergent cleaner. If either are a concern then just use soap and water. Just be patient and wait a few hours...

I have used soapy water and I have also used Windex and I prefer using Windex. Soapy water takes a much longer time to begin evaporating and depending on the glue used for the stripes I have run into adhesion problems on stripe corners. I usually lay down the graphics with both backings...

You need to make sure the area is clean dry and cool. I never install graphics in direct sunlight. Also wipe the area down with rubbing alcohol and a lint free towel a few times to remove any grease or wax. Also get some medical gloves, the oil from your hands and fingers can cause...

Going on at the same time as the air show , always fun to watch the planes flying around and the drags. :headbang: I will not be racing but will most likely put my Charger in the car show.

Neither the clock or the towing package are listed as options on the fender tag. You would need your build sheet for a complete list of factory installed options. If your Charger does not have a HEMI and had the tow package it would most likely have HD breaks and the 26 inch radiator. If your...

They made up a great story for the car and for many years people believed it with no questions asked. Then the whole collector car fraud and re-body issues came up and people had to start answering the hard questions. The creator of the car gave the magazine the real story and had a good laugh...

200 is a bit high Why did you install the pusher fan? What does your temps do if you take it out? I'm wondering if the electric fan isn't blocking air flow. Can we see a picture of your setup?

Got my aunts car to sell and was wondering if anyone can do a car fax for me? PM me if you can. Would be appreciated. Steve

HA I fell like a real dork I should have looked at the date of the origional post. I didn't realize this was a post about a problem dug up form 2010 I'm glad you got your problem solved Jimbo Engine compartment looks great.

I know its hard to see in the pictures but the shroud that hold the electric fans in my setup have rubber flaps that stay closed when you are driving slow or at a stand still pulling air from the shroud through the fans for max air flow. When the car is at speed the rubber flaps open up allowing...

Since Jimbo Billy Bob is running an electric water pump and electric fan he is looking for a solution to his temp problem not a debate on Electric vs. Stock Fan. I would also make sure you have a anti-collapse spring in your lower radiator hose Billy Bob.

Found the images of my fan and shroud setup

Been here and done that. You need a set of fans with a shroud that covers the radiator. I cannot run a clutch fan because of my aftermarket AC. I worked with Be Cool and got a fan and relay setup that fixed my cooling issue (I run a mild built 383). Also the 8 small impeller water pump is for...

Value is going to be in the quaity of the build plus the extras. If you are after the highest value you will need a origional numbers matching car, factory colors and options along with a build sheet and fender tag to back it all up. If you are missing any of these then I would say to just...