• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  • Users: dickdale
  • Content: Threads
  • Order by date
  1. dickdale

    P0688 ECM/PCM Power Relay Sense Circuit

    I've got a P0688 code on the tuner with my Mopar Crate Harness Kit 6.4 Hemi. Car ran great before. I've checked the relays and fuses, the battery and ground cables are good. Can anybody help me out?
  2. dickdale

    Sound German Automotive kit with Mopar harness and NAG1

    I'm in the progress of getting the final things done before driving my 70's Satellite. It has a 2014 6.4 Hemi engine, a 2006 NAG1 transmission and I'm using the Mopar Harness kit with the Sound German Automotive kit. I've connected the canbus wiring (canbus high and low) from the SGA kit to the...
  3. dickdale

    3gen Hemi, NAG1 and 8 3/4 rear end. Which drive shaft?

    I've swapped a NAG1 behind the 6.4 Hemi in my 70's Satellite and was woundering what you guys are using for a driveshaft? A one piece or a two piece driveshaft? I'm still using the 8 3/4 rear end with 489 carrier. I'm measuring almost 64 inches between the Sonnax trans yoke and the u bolt yoke...
  4. dickdale

    Which carrier do I have?

    I've got the diff out because of a gear ratio swap and want to refill it. Which carrier do I have and which fluid do I need?
  5. dickdale

    Wilwood brake kit identification

    I’ve bought a rear disc brake kit. The previous owner had them mounted on his 8 3/4 rear end. The brackets are numbered 250-1808L/R. Does anybody know if this is an older model disc brake kit from Wilwood?
  6. dickdale

    WTB Pair of 1970 Charger side scoops

    Looking for a decent pair of 70’s Charger side scoops with RT emblem. Willing to ship.
  7. dickdale

    69 Coronet vs Super Bee

    Are the fenders from a 69 Coronet the same as the fenders of a 69 Super Bee?
  8. dickdale

    WTB 1970 RR tail light bezels

    I’m looking for a pair good pair (no rust) tail light bezels. Willing to ship.
  9. dickdale

    Rebuild NAG1

    Has anybody done a NAG1 rebuild? I would like to know the difference between the Mercedes 722.6 and the Chrysler 722.6. On the outside they are the same (besides bellhousing) but i've red that some internals are different.
  10. dickdale

    46RH isn’t working like it should

    I recently almost finished my project doing a 2014 Hemi engine with a518/46RH in my 70’s Satellite but the transmission isn’t working properly. The only thing I didn’t check or rebuild was the trans because before I bought it it was rebuild. When going to a full stop the engine wants to stall...
  11. dickdale

    Nag1 in 68-70 b-body?

    Anybody swapped a nag1 into their 68-70’s b-body recently? I’m looking for idea’s.
  12. dickdale

    46rh trans behind 3gen Hemi

    I have a 46RH (from 1992) behind my 6.4 Hemi engine (from 2014). The transmission doesn't seem to shift right. The fluid level is ok. Rear end has 3.91 ratio and the convertor is stock from a b250. The engine is also stock. When I start driving it shifts fast to second gear. To fast if you ask...
  13. dickdale

    Engine wants to stall

    Using a 6.4 3gen Hemi with a518 46rh in my 70’s Satellite. The trans has overdrive and lock up, 3 pin connector. When coming to a stop the engine wants to stall. If I put it in neutral when coming to a stop and drive again it’s fine. When accelerating it shift fast into gears. To fast in my...
  14. dickdale

    base plate bolt pattern 8 1/4 vs 8 3/4

    Is the bolt pattern of a 8 3/4 the same as the bolt pattern of a 8 1/4? Can the drum brakes of a 8 3/8 be mounted on a 8 1/4 rear end without any husstle?
  15. dickdale

    Brake pedal play

    I’ve converted my manual brake 70’s Satellite to Power brakes using a Wilwood master brake cylinder (7/8” bore size), Bendix style booster with linkage and stock manual pedal. The brakes have been tested and they work excellent. The only thing is that the first 1/4 of an inch the pedal doesn’t...
  16. dickdale

    8.75 gear swap

    My rear end has a 3.91 in and it is making noise when letting go the gas pedal. As a will be using the car as a cruising in stead of racing it I’m going to change the gear and pinion to 3.23. I haven’t done this before and want to know which parts I need. I have replaced the axle shaft bearings...
  17. dickdale

    Hotchkis front sway bar

    Which front sway bar will fit my 70's Satellite? according to the Hotchkis website: Part number 2255F is for 66-69 B-bodies. Part number 2254F is for 70-74 E-bodies however some website say they will also fit 70-74 Mopar B-bodies. Does anybody have experience?
  18. dickdale

    Steering coupler play

    I have to much play on the steering column. Most of the play is in the column to coupler. There is also play from the coupler to manual box shaft. What kind of options are there besides replacing the old coupler for a new one?
  19. dickdale

    Ford 9" rear end

    For my 70's Satellite I'm looking for a Ford 9"rear end. Which rear end is plug and play? Which has the right length?
  20. dickdale

    WTB C Moldings 70’s Plymouth Satellite/RR/GTX

    I’m looking for a mint pair of C moldings for my 70’s Plymouth Satellite/RR/GTX. They have to be in mint condition.
Back
Top