Search results for query: *

As the title says, I am considering buying a drone. I know nothing about them. I asked my bro-in-law for some advice and pricing and he said plan on spending 1k. I see them for under $500.00 on Amazon. I am looking for one that will take decent pics, I build/renovate a lot of decks and an...

I posted an earlier thread about a 3/16" gap between the flex plate and converter with the converter fully seated in the tranny, was told it was fine. When I try to bolt the flex plate up to the converter the converter will not pull in against the flex plate. I am bending the flex plate. I...

Installing my 727 to a new used 440 I bought from a friend. New flex plate from 440 Source. New torque converter from Frank at Dynamic Converter. When I mated the tranny to the block there is a 3/16" gap between the flex plate and torque converter. My new ARP bolts only have 1/2" of thread. How...

Asking for a friend with no internet skills. He has a 65 Belvedere and is replacing the 318 with a 440. Will his existing power steering pump be compatible with the 440? Thanks

PRW Performance Platinum Series?? Never heard of them. Has anyone used this flex plate? PRW Industries 1844010 Performance Quotient PQx Platinum Series High-Integrity Flexplates | Summit Racing

I'm currently having my transmission gone through while I wait for my new engine. I will need to replace the TC since the new engine has a steel crank versus the old cast crank engine. I have narrowed it down to a 2400 stall after way too much reading on this subject. My three choices that I...

Been having a problem with my 440 since it was built. I pulled it this weekend and just removed the timing cover. According to a video I watched on youtube, Pete's Garage-Cam install it shows the timing dot on the cam gear at 6 O'clock, pointing straight down towards the gear on the crank...

I currently have a 1977 440 block in my Daytona clone, after multiple issues I have purchased another 440. The new engine has a build date of 1968, so the inlet and outlet on the water pump is the reverse of my current motor. Can I just swap the water pumps so the water pump outlets line up...

What do you guys use for treating the wood decking on your trailers? I've tried a few different brands and they don't seem to last more than a year.

69 Charger. Started running a bit rough two weeks ago, thought I picked up some debris in the carb, cleaned it out, no better. Went to a friends mopar party last Saturday (150 miles round trip). On the trip home we pulled onto the highway to cruising speed, 70, wife said she thought she could...

As the title implies, the wife and I are thinking about going this year. If anyone here has attended would like some feedback, good or bad. Decent places to stay, would be trailering so I always need to factor that into the parking arraignments. Thanks.

I want to check the angles on the driveshaft and rear end to make sure everything is with in tolerance. The 1969 FSM shows how to do this but they are using an old fashion bubble level. When I built my 68 Charger several years ago I had found the process on how to check it and the angles were in...

A few years ago I got my 68 Charger resto mod on the road. It had manual drums. I converted it to power with front discs. Because of the cam I have low vacuum so the brakes are marginal. After several suggestions from other Mopar friends I installed a vacuum pump. I now have plenty of vacuum at...

My Daytona clone has a fiberglass nose that was made back in the 80's -early 90's. Instead of the headlights popping up I have doors that are hinged on the bottom on a vacuum pod that fold down/back with the headlights mounted inside. The problem is at 60 mph the vacuum pods can't keep the doors...

Right in my back yard. Talk about being in the right place at the right time. https://www.ebay.com/itm/1970-Plymouth-Road-Runner-Super-Bird-BARN-FIND/392122524129?hash=item5b4c52e1e1:g:XYgAAOSwDYBbmC5z&vxp=mtr

Starter just clicks, will not engage. Battery is good. Pulled the starter and had it tested, it's still good. Obviously not getting enough juice to the starter. What should the voltage be at the starter relay when key is on , and when key is in start position? Will check for any loose...

I am getting close to putting my clone on the road. She's a very nice driver, no trailer queen. New paint, rebuilt engine and tranny (440/727A), suspension upgrades, all new wiring harnesses, interior is new or very nice used items. I have 40k into it including the sale price and shipping...

Does anyone have or know where to get a template for the Daytona Z-Brackets?? A Mopar friend of mine has a nice machine shop and wants to see how difficult it would be to make these.

Is the body line on the quarter panel a perfectly straight line? When I pull a string line from the middle of the marker light on the quarter to the door jamb the body line is higher over the wheel wells (about an 1"). The Charger has replacement quarters that were hung about ten years ago so...

Anyone running this radiator? Not up to speed on radiators so any input is appreciated. http://www.ebay.com/itm/320863743215?_trksid=p3984.m1423.l2649&item=320863743215&viewitem=&sspagename=STRK:MEWAX:IT&vxp=mtr