Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Posting for a friend:
1965 Satellite, 360, automatic.
While driving home from a show car just quit. Has no power anywhere, just before it stopped running there was a small smell of smoke.
No headlights no parking lights no interior lights no ignition.
Battery is fully charged, car...
I recently purchased a 69 Dart which has a 383 with 346 head castings.
A previous owner installed a Comp Cam part number 21-222-4, CRB XE262H-10 along with a set of dual valve springs (with a damper).
I wanted to install new stem seals (while I had the heads off) but found the stock seals in...
Wanted clutch fork for my 69 Dart big block 4 speed conversion.
The following forks will work for my application.
1966-up B/E-body and 1967-69 A-body big block, and 1970-74 E-body/1971-74 B-body small & big blocks. 10 7/8" overall length. Reference Chrysler part # 2643702
ALSO...
Need some assistance on identifying this power steering pump. Also, can anyone tell me if the bracket is complete? Wanting to use it on a 383. Thanks
.
I may need an “eyeball” inspection on a car at a dealer in Elmhurst I’ll. 2006 Charger STT8. Would gladly pay for your time spent. Please PM me. Thanks.
For the last several days I've been chasing a "tick tick tick" coming from the right side of the engine near the distributor and number 2 cylinder. Sounded like a spark jumping. Fooled with wires, replaced the distributor cap and have a new set of wires on order. Even pulled the valve cover...
Will be taking my 65 Satellite 383HP/4 Speed car to Carlisle. Car will be located in space R36 directly across from the covered car corral pavilion. I will be there Thursday thru Sunday.
ENGINE:
383 HP believed to be the original. Replaced automatic with 4 speed.
516 heads
509 cam (per...
Will be taking these 915 heads to Carlisle and will be in space R36 which across from the covered car corral pavilion. Heads were part of a larger group of parts purchased. Was told by PO they were fine and were pulled from a running engine. PRICE: $350.00
I will be there from Thursday thru...
Taking the following to Carlisle and will be there Thursday thru Sunday. All parts are in good to excellent condition.
Edelbrock RPM/Quick Fuel 770.. Excellent condition $475.00 For low deck 383/400
Big block aluminum valve covers Excellent condition...$100.00
Edelbrock Performer/750...
Helping a friend locate parts to repair his 65 Belvedere that was damaged..
Need:
Deck lid and the hinges
The rear finish panel that’s between the bumper and deck lid
Rear bumper and possibly the bracket
We’re located in north central Florida.
Thanks
I'm still wrestling with a suspension issue on my 65 Satellite. As posted in a previous thread I can't maintain the ride height adjustment. After adjustment the right side "sags" or lowers itself almost to the bump stop no matter how much I adjust the bolt. The torsion bar cross member is...
I've installed an aftermarket mechanical speedometer in my 65 Satellite. It's a 4 speed Transmission with the flanged output shaft. The speedometer cable is part of the speedometer gear (I hope I'm describing that correctly) it is not like the 66 and later transmissions where the cable...
Installed new lower control arm bushings and the old torsion bars and had the front end aligned. Prior to alignment I adjusted the ride height. After a day or so the right side becomes lower than the left. I've readjusted the torsion bar on that side but it continues to "lower itself". The...
I ordered and installed new front door interior panels and I have a question regarding the hole for the door lock button hole. Is there any grommet type trim for the holes? As you can see it it looks unfinished (in my opinion). Anyone have a similar issue? Thanks.
I have a hardwired system (not wireless) in my home and need some technical help.
The system is 15 years old , has a Honeywell Keypad and contacts on all the doors and windows.
My keypad shows no display but the armed and ready lights are lit. I've replaced the battery, checked the small...
Just curious if anyone knows if there is a carb that fits this bolt pattern. I've used this intake before with the adaptor plates for the Holley but what other (if any) carb would work without the adaptor plates. Thanks