Search results for query: *

I have a 727 with l as than 10k miles on it. I took my car down for winter upgrades and four years later she is back up and running. The motor is rebuilt and running great but I don't have third anymore. I have adjusted the linckage and it shifts into park, reverse and neutral perfectly. To...

Cleaned and magnifluxed 452 head from a 78. Engine was running great but I was rebuilding it. I had both heads magnifluxed and one went to the scrap bin. In Glenpool Oklahoma. 74033 50 plus the ride.

Located in Glenpool, Ok 74033. 13th week of 1968 Alternator. Was working on the small block I had but needs cleaned up and rebuilt. 100 plus shipping.

bare 452 head that has been cleaned and magnifluxed. $50 plus shipping.

Below is the link to my craigslist add. I am trying to sell it to help fund my 66 Charger. https://tulsa.craigslist.org/cto/4949739060.html PM or call if you have any questions. The add should explain it all. Shawn

Pictures tell the tell. These are off of a 1968 Dodge D200 with a 383 (wish I would have purchased the whole truck). Casting numbers are 2532626 and 2532464. I believe the casting dates are good for 66-69. The exhaust butterfly has been removed and the hole welded up. We did not weld the...

I purchased the TVS system for my 66 Charger and the rear sway bar will not work with a full exhaust. It has been mounted and used for about a year and a half or so. Nothing is wrong with the sway bar but the drone from the exhaust has been fixed. Asking $300 OBO plus shipping from 74033...

I have one head off of a 1978 truck motor. The head has been cleaned and magniflued. It has good studs, no cracks, and all of the tapped holes are good. $100 plus shipping from the Tulsa Oklahoma area. Shawn

I have one 906 head that has been cleaned and magnifluxed. Bare with no cracks, good studs and no messed up tapped holes. I had hardened exhaust seat put in it years ago. $100 plus shipping from Tulsa Oklahoma area. Shawn

On a 727 (1978 small block in a power wagon) can the reverse servo arm be taken out and put in without taking the transmission completely apart? The center part that pushes on the low reverse strut rod broke and needs replaced along with the rod reinstalled. Thank you.

Big block AC bracket $10. plus shipping. Shawn

I have a big block 400 that is a 230 casting. This is a standard bore at 4.34". It will need to be bored for the rebuild as there is a ridge at the top of the bores. Comes with the main caps. Also has the stock forged crank and dampner if you want them. casting date 9-28-71 (I believe)...

Can someone tell me what this is? This was in the console of my 1966 Charger and it does not belong to my car.

Stock take offs from a 66 Charger. Nothing wrong with them as I upgraded to Firm Feel bars. They where in the car when I got it and drove it for the first 6 months. numbers are 266 on the left bar and 256 on the right with the letters DD CD then L or R. other ends are 777 and 776 and the...

66 B body strut rods take off. 25 bucks.

Stock take offs. Can be bead blasted before shiping. 10 bucks each.

Stock take off lower control arm pivot pins from a 66 B body. 20 bucks.

These are stock take offs from a 66 Charger. 50 bucks

This is for an LA small block to 727. This was in a 66 Charger and worked fine. $20 plus shipping. I will bead blast for another $10 before shipping if desired.

Gents, I have what came out of a 1968 D200 2wd 383 with a 4 speed quad cab truck. The numbers on the flywheel are 9015 on one side and 06059 on the other. Is this trully out of the 68? The 06059 makes me wonder if it isn't older. Once I am sure what it is I will repost is the forsale...