Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have two 3 row brand new aluminum radiators for sale buyer pays for the ride.
#1 - Champion CC1635 3 row brand new still in the box [never opened it] i want 125$ firm they retail for 200$ or more depending on vendor.
#2 - KKS 6669 3 row brand new never has had water in it, however was used...
My son bought this as a project in April 2011 it has had it's ups and downs but we have finally gotten to the point where there is light at the end of the tunnel. It is in primer/sealer and we will be shooting polyester filler/primer in the next week hoping to have it painted by april 2013...
What vehicles should i look for at my local pick n pull for disk brakes to convert my 8 3/4 from drums. I'm useing this rear in my 73 charger [it came out of another 73 charger] to replace the 8 1/4 in it now. We are building this car to use in Poker runs and fun weekend backroad driving. Thanks...
My beloved 98 cummins dually [white one pictured] had a fatal wireing harness short in the engine bay this past monday,i'm waiting on insurance adjuster to come take a look i'm unsure of what may happen [i'm expecting the worst]but trying to be optimistic.Anyways if they total it i have to...
We are redoing a 73 charger it was bought as a basket case i'm in the process of hanging the sheetmetal for alignment purposes and the passenger side came out fine but i have reached a possible problem take a look at the photos and see my issues.My question is were the fenders in this area...
I'm rebuilding a 73 charger i'm in the process of hanging the bolt on sheet metal for alignment/fittage prior to prime and paint [it's not going to be a showcar i don't suppose, just a decent driver]. My question is if i have my doors,fenders,hood,trunk where i want them how or what tricks are...
Thanks to Debbie i have waterfront property,this happens every hurricane season we have had over 6 inches of rain so far today in my area. My mobilehome and garage are ok [except the porch is flooded]. The photo of the street flooded is looking west from my place about halfway down is deep...
This club has put on this event for years it is a free picnic [donations accepted for hillsborough teaching tools] they serve hot dogs,chips,nachos,chili,desert and drinks plus door prizes. There are no trophys and no judging just a family/gearhead gathering in a state park setting,over 100 cars...
This was an invitation only show held yearly by a local mopar collector at his home, my son and i have been honored to attend the last three years [the local tampa bay area members may have heard or attended this]. Quite a few cars came out today some left before i got out to take photos [did...
My son has finally pulled the trigger on the shumaker kit so he is now wondering about the engine, what we have is a 440 [75-78 block] stock stroke,flat top pistons,4.307 bore [i'm guessing .30 overbore] heads are stock 76-78- 2.08 int.- 1.74 exh. Engine has been machined and short block...
I and my son bought a project 73 charger, the P.O. took the car apart and when i finally did an inventory of all the boxes i found that i have no bolts for any body panels [except trunk lid]. My point is any one who is parting out a 71-74 charger/corinet/satty if your not sending the [bolts/the...
As i have said i'm not a fabricator or do i know how to weld [when i started this project] i'm getting better not great but better than earlier this year. Hopefully this link works to my photo bucket of my bucket, it's coming along but slowly my son will have fun with it...
My son purchased this car for a father/son project but has lost intrest due to working full time and going to college full time, i work on it when i can. So he is looking to sell it. We have all sheetmetal [rust in usuall places] comes with a 74 block 440 [machine work completed...
How do you do it? This is my first attempt at doing sheetmetal replacement [i guess i shoulda taken some welding classes back in the day] I have a flux core welder[that was loaned to me] 110 house current .035 wire i have played with the feed [have no idea what's right] don't have an amp...
I'm new to the B body site i have an a body and a member of a bodys only,my son however has bought a 73 charger and i have been tasked with it's rebuilding, with his help when he is not doing college schoolwork. It's a 1973 Charger basket case, po disasembled the car 3 years ago and lost intrest...