Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have the original grille, bezels and center piece off my 67. There are no damaged pieces here, all nice and straight.
Located near Green Bay Wisconsin. Will ship, but at buyer's expense. I can take better pictures if necessary, these are just what I had floating around from my old build...
I have a re-buildable 1977 360.
Its torn apart but looks in good shape and not been previously rebuilt.
Comes with block, heads, crank, rods & pistons, oil pan, timing cover with brackets.
Also comes with a cast 4bbl manifold.
Asking $150 OBO Located just east of Green Bay Wisconsin...
I have a set of newer Charger police wheels for sale. Should be 5 on 4.5" bolt circle. I paid $200 for them and am asking for $200. They are really clean, no rust anywhere and pretty good paint. Nice and straight!
Located Green Bay Wisconsin. Will ship if you want, but probably a bit pricey to...
I've got a 70's 360 in the garage that has been apart for a while. Got it on trade recently and don't know a ton about it. It's slathered in grease and not all rusted up. Crank looks good and usable and so do the cylinder walls. Everything looks like it could be hot tanked and likely...
I am starting a new project. The car is a 2 door post Deluxe model that has had all rust repaired with metal, sealed and painted. The undercarriage has been cleaned and undercoated with professional undercoating. The whole vehicle has been gone through, nothing has been untouched.
The engine is...
Selling my Hotwire Auto harness for my 5.7 Hemi. It is setup to run a manual transmission or hydraulic control automatic. Comes with 2004 computer which was tuned by Hotwire for a manual transmission (or hydraulic automatic). Also comes with the cable style throttle position sensor. For...
I bought two late model Hemi's for my truck project in which I have now sold. I'd like to do a few things to my engine in my car so these must go.
I have a 2003 and a 2004 5.7L Hemi. Both are truck engines.
The 2003:
It is completely dissembled, what you get is the intake, heads and valve...
Hey guys, wondered your thoughts. Some of you may be aware of my car, and some not, so the background:
2003 5.7 Hemi in a 67 Coronet. Running a Stock computer and hotwire auto harness. Engine is completely stock.
I bought a couple core engines for my truck project and think that is going by...
1982 Dodge W150
360 4bbl with Edelbrock Carb
727 Auto
NP208 T-case
Dana 44 front axle, 9.25 rear axle
Comes with Dana 44 and D60 axles as an upgrade (8 lug heavier duty with 4.10 gears)
Arizona truck completely rust free - Located in Green Bay Wisconsin Area
I have all the trim for the truck as...
Its official, I am starting a new project and need to sell my car. I began this car approximately 5 years ago with a beat up Coronet and spent 3 years working on the restoration. The car is a 2 door post Deluxe model that has had all rust repaired with metal, sealed and painted. The...
Hey folks,
I figured being a bunch of Mopar nuts I had to share my recent experience with Dodge. As many already know I have bought Dodge vehicles since I got my drivers license. So it shouldn't have been a surprise for anyone that I recently purchased a used 2013 Durango. Sometime after...
I am thinking about starting a new project. I began this car approximately 5 years ago with a beat up Coronet and spent 3 years working on the restoration. The car is a 2 door post Deluxe model that has had all rust repaired with metal, sealed and painted. The undercarriage has been cleaned and...
We are selling our 2013 Dodge Avenger. We are the original owners, still has a year of power train warranty left; bought it new for over $22,000. The car is in excellent shape with only a couple door dings. It has the 3.6L V-6 with 283 hp and 6 speed automatic. It has power windows, power locks...
Anybody planning to go to this years cruise? It looks like this years featured cars are Mopars. I think now that my car is back together and in good form I may make the treck over there to check it out. Would love to meet up with a couple FBBO members.
Friday, September 23, 2016
6:00 - 9:30...
I have an empty 741 case housing I won't be needing. I also have a set of 3.55 gears for sale but no carrier. The case is in good shape but no pinion snubber.
Asking $80 obo + shipping for the case
Thank you,
Kevin
Will trade for a good set of performance rear springs or a sway bar for a 67...
I have a set of gears from a 741 case. They ran quiet and look in good shape. They do have some really really tiny surface pits at the outer edge of the gear but don't affect anything. I ran them for a while but switched back to my 2.94 gears to better match my transmission.
I am asking...
So now that I have 8,000 miles on this combination all of a sudden I started getting a drive line vibration on deceleration. It is the worst if you push in the clutch and remove all load. Makes very little to no vibration under cruise or acceleration and vibrates under coast. Before you say...
I have a 8 1/4 rear which is the same width as a 66-67 B body rear end. Its out of a Jeep Cherokee and has 3.07 gears (I think) and open. To use in a B-body you would just need to weld on new pads for the springs and remove the old ones.
Will trade for sure grip, G3 Hemi Parts, 67 Coronet...
Looking for a suregrip center with 3.23 or 3.55 gears. I'd partial trade if interested for my 741 open with 2.94 gears. Also might have other parts for 66/67. Have a grille...some others.
Want to spend $400 or less. Let me know what you have. Thanks.
Hey guys,
I tried searching but for the life of me can't find the post. There is a member on here that makes new replacement badges for the 60's era cars...specifically made a 345 Hemi badge instead of the 426. Now that I have moved away from the sleeper look a bit I'd like to swap the v8...