Search results for query: *

I have Bbody mopar parts that came off a 1971 charger 1) 1971 CHARGER Tail lights, there is some damage to the light housings, all light coverings and wiring harnesses are good - $50 2) 6 side view mirrors for b body mopar. All glass is good. One set has some pitting on the housing. - $100 for...

I am hoping someone can give me some info I have a 71 charger front bench seat that has 2 broken springs under the driver section. I cant find replacement springs. Does anyone have a technique or know of a substitute type of spring? Dane

I appreciate it. I already took out the thermostat and put in hot water. It worked. So i am going to remove the pump and see how it looks. Thanks for the input

For hoe long?

If I let I sit for long enough it will start to ses smoke exit the valve cover which I belive I'd the coolant

Thermostat is good and the head gaskets were the universal application from fellow pro. No up or down either way on is good

Its up on jacks as i just finished putting it all back together. At idle the fan spins and the engine is getting airflow. Its just keeps overheating

I have a laser gun coming tomorrow. The guage is showing that in 3 min. By the way its an aftermarket guage. But i checked it with some hot water and eveything work correctly. I put my hand on the rubber pipe but im a cant tell the difference between the vibration of the engine and the coolant...

Hello i have a 383 thats keeps overheating. Lets start from the beginning I had a valve that needed to be lapped. I drained the coolant and removed both heads. Changed the head gaskets and the heads bolts and torqued everything down as per the manual. I also changed out the intake manifold and...

Thanks!! 1 more question , does it matter where the secondary switch is placed on the evaporator to compressor line? Close to compressor or evaporator?

Are the 3 plastic guides still in place? Many times they crack and allow the window to improperly ride on the track. Usually the window adjustment is minor and doesn't require much tuning

Thamks! Another question- so secondary temp switch will take the place of the epr valve? By chance do you have a picture of the epr valve so I can verify what should be removed. And when purchasing the secondary temp switch are their any specific characteristics I should be looking for? THanks Dane

Thanks everyone. I found someone who was selling one and I purchased it.

Hello I am restoring my AC system and the oval fittings that connect to the compressor seem to require an o RIng to fit in an indented space. Can any r134 o ring work or does it need to be a special one? Thanks Dane

That's it. It looks good. What price do have in mind?

sorry for the late reply my phone died. i attached a picture of the connector i am referring to ( its damaged, some of the posts are missing). it is on the side of the ac control. i appreciate your assistance. if the connector is undamaged i would like to buy the AC panel. thanks Dane

Turn it 90 degrees and you will see the connector. Its on the bottom of the dash.It's on the assembly that holds the AC control

Ok I see it now. Your second picture shows it at the end. Can you take a picture of the right hand side? That's where the harness connwcts

Im sorry , there's some confusion. I need the AC control panel that is connected to the dash. We're the AC and heater knob are attached

Great!! Can you send me a picture of where the pnuematic harness connects. Just to make sure it's the right one and do you have a price in mind? Thanks!!