Search results for query: *

hit the belt sides with a candle, just let it hit and pick up some wax.

These are non branded 10" covers that I think will fit pre 67 4.5 bolt Mopar rims (?) and whatever else uses the 10" cover. They are NOT 10.5 and are not 9s. All 4 have a chromed finish, 1 has a little ding on the side that could be pushed out or ran as you don't really see it mounted. $62...

Thank you...explain what and how vacuum secondaries open on a 3310.

I believe you are incorrect... Ported vacuum increases with the velocity within the carb venturi, ie when the car is under WOT. The velocity through the venturi runs across the ported vacuum port on the side of the venturi (or a little under it) sucking vacuum out of the nipple, or creating...

Im over on FABO and did up this intake for a turbo build Im doing. I have the injectors in the head itself so there are no bungs on the runners. That AL piece is very nice, how I was going to fashion mine too, but that would have hit the turbo in my case. I fashioned this out of EMT, a piece of...

Here is another Craigs find INland Empire, CA. http://yuma.craigslist.org/cto/3335187025.html

Try these guys, I bought a used swap meet radiator for $50 and found out it was one of theirs. Looks fine to me, 2 1" cores and they are pretty cheap new. http://www.dillonradiator.com/index.php?main_page=index&cPath=1_133_1638_16106_63652 they may not have an exact app for a earlier B but mine...

BW T10, Muncie M-20 and Saginaw all share same bolt pattern, Super T10 is different I believe, but they are very different than an 833...Yolu wanna put a T10/M20/Sag behind a Mopar, I got what you need, brand new Tilton with hydro throw out... PM me, I ship to Oz.

Yes sir, your coupler is square right? The original springs were square wave washers between the square blocks and the shaft, no "clip" involved. I got the entire setup minus 1 wave washer and correct rectangle rubber seal.