Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
These are Mopars discontinued valve covers part number P5155526. Have had them since 2012, was saving them for when I built a bigger big block way back but didn't, now just have small blocks. Asking what retail was $330 plus shipping. Never mounted still in original Mopar box. Comes with...
Location: Nampa Idaho
Have a set of GRP billet rods 7.100 length, 2.2" ends and a .990 pin. New never ran, if I remember they were used for mock up in a engine but never ran.
Asking $600 for the set plus shipping.
Location: Nampa Idaho
First pair of wheels: Coys 15x6, lug pattern 5x4.5, these are not made any more in 15" asking $100 each plus shipping, gun metal inside, polished ring. again its a pair only 2 wheels.
Second pair is: Jegs SSR spike 15x7, lug pattern 5x4.5, wanting sell to get the 15x4...
Location: Nampa Idaho
I have my 72 satellite that I won't be able to get to since taking on a 67 dart. It has a 440 bored .060 with good meat left on the cylinders, head and mains studded, 11.5:1 ratio hyper pistons, CAT h beam rods, factory steel crank all balanced, Isky 292 cam, degreed in...
Located in Nampa Idaho
Selling off my 77939 bare max wedge heads, they have been CNC ported by cncport.com, they used these heads for the program. Asking $2200 plus shipping. Heads new are about $1300 and the CNC is $1400.
Location Riverside, Ca
I have my 72 satellite that I won't be able to get to since taking on a 67 dart. It has a 440 bored .060 with good meat left on the cylinders, head and mains studded, 11.5:1 ratio hyper pistons, CAT h beam rods, factory steel crank all balanced, Isky 292 cam, dual roller...
Location: Riverside
Price: $500 local pick up only due to size and weight of it all
Have a twin turbo set up for a small block, includes headman truck headers, feed pipe to turbos flange t4, 60mm waste gates, down pipes and waste gate tubes to run back into the exhaust also included is two...
Location Riverside,
Free to whom ever wants to come and pick them up. Just need to buy new shoulder bolts to mount them. Tires are very old on them, need to replace.
Asking $600
Prefer not to ship since its bulky. Made for a small block stock block only unless you want to mill some off the block for clearance.
Includes the headers, pipes front header to turbo t4 flanges, waste gate pipes to route back into the exhaust, 60mm waste gates, and 3.5" down pipes...
Hello,
Selling these due to Coyz not making 15" wheels anymore. They are 15x6 5x4.5 bolt pattern, grey center and polished outer ring. Comes with the Alan wrench for hub caps and acorn lug nuts.
$180 for both plus shipping. Only mounted on the rotor just to see how it will look and never had a...
Hello, was going to have a cam done by Shane at crower but it won't work for my build so if anyone is interested its a
core 50mm 4-7 2-3 swap core that is set on a 106lsa. So we can change it to 108 lSA max. Hes on forabodiesonly dart19666 or [email protected] just passing your along, it a...
Some people have shown interest in these for fiberglass doors, to have to look and adjustability of a stock type hinge. Jerry at SD Concepts said he can make them from aluminum just seeing what most people would want. So here's the poll. Jerry says for cost to stay down its better without the...
Located: Riverside CA
Price $2000
72 block 360, has been 0.060 over, actually has good thickness still, was pulled out of my dad's ram dually. 10.1 comp, swirl port heads, ports were smoothed, performer intake, milodonwater pump, will have new brass freeze plugs installed, doing it tomorrow...
I know alot of you have heard of theit new heads for the 440's, but I wrote them and they said they have been getting alot of requests for them to make small block mopar heads and they said they will seriously be looking into it so hopefully they do come out with something and add more options...
Just thought id share, I'm working on a 67 Dart for my wife and since chrome is getting way expensive, few calls people wanting $425 per bumper looked into what's called extreme chrome powder coat, got both bumpers, vent window front frame piece and rocker panel covers all done in this for $120...
If anyone is interested in either I know a awesome company here in California that can due either, course with a custom full dash either need the car or I guess you can take them or send them the factory dash and tell them what you want done. Will post a picture of the one I had made for my...
Finally got it to fire up, still messing with timing a bit, sorry for the crappy speakers.
440 +.060
Ported stealths
Ported M1
1050 dom
KB 11.75:1 comp
steel crank with h beam rods all balanced
super comps
MSD 7al with MSD pro power hcv coil mopar race wires
built 727
Dana 60 4.56 w/ locker...
Okay wondering who all is running one of these, I got everything ready to finally start the motor, and now my a2000 pump with the regulator on the pump it self all the way out and the a2000 regulator 4 port one, even that's all the way out and the fuel pressure gauge goes to 32psi when pump is...
Okay myself and my dad are confused. I get oil when manually primping the system to the left bank but nothing to the right, ran a wire down the oil feed goes to cam, oil gauge reads 80 psi with the drill going. Any ideas??
Engine is a 440 with stealth heads. The rockers on the right side aren't...