Search results for query: *

wanted, 1970 coronet rear bumper, looking for a decent rear bumper with brackets.possible trade of resto parts. let me know what you need.

I am looking to buy a super stock scoop for our 65 coronet and came across the mazzolini part, it looks good but there is no info on it. have any of you used this or maybe know some thing about the part ,is it a bolt on or bond on type. any help would be greatly appreciated.

hey guys I need a console for our 65 coronet 500, automatic, also the door panel trim and emblems if anyone has some that would be great. also need a rear view mirror. thanks

ok so i sold my 67 satty, and purchased this 1965 coronet 500. it is a real basket case with most if not all of its trim removed and placed in the trunk. i have no experience with these so i will be asking for alot of help. the car was built in l L.A. and still has the original dark turquoise...

ok, so i have been working to revive my electrical system on my 67 plymouth satellite, i have all lights working now. here is my question when i turn the emergency flashers on they only work at the rear, and i have no indicators on the dash flashing. I checked the schematic and they show to be...

i am selling my INDY Max Wedge bathtub intake manifold. it has the 2x4 top with studs and mounting hardware. it was used for one season. this was for a build that has changed direction. I am asking $600.00 plus the ride from 85051 phoenix. please PM me for pictures, as my computer is not...

i have the oppertunity to pick up a set of max wedge stage VI heads, said to have been ported and flowed and never installed. the price is 1200.00 what will i need to use these on a non max wedge engine. I know the intake is different( huge ports) and i think they require the off set rocker...

hey guys, i recently aquired a 440, casting date is sept 8 1965, it is all original out of an Imperial intake to pan. it was in storaged covered up for at least 20 years, turns over nicely and sounds like it could have decent comp still( you know that whoosh sound when you turn them over by...

i am in the process of rebuilding the front end while doing a wilwood upgrade and found my strut rods were bent. the car had been hit at some point in its life. so i find myself in need of replacements, soooo the question is stock or aluminum? i am really not interested in the adjustable ones...

I just picked up a 1970 440 HP block that says paul rossi-4 in very old paint on the front of the block. does this mean anything? the guy said that rossi was some racer in the 70's.any info would be great.

hey guys, I have two sets of gears for my dana and want your opinion. the drive line is a 11.1 440 with steel crank H beam rods and stealth heads with a 305 h cam and torker 2 intake with 850 holley. the trans is a hughes built 727 manual v/b with a mopar J convertor. I am using 30" rear tires...

hey guys, I know it's been gone over in other post's but I have searched and have yet to find the answer I am looking for. OK I am going to relocate the springs on my 67 satellite to the frame, the MP kit is on it's way so my question is on the rear hanger location do you remove the original...

OK so I had my dana at the diff shop and they were having trouble setting it up, apparently at some point it spun the bearings causing some damage to the saddles as well as damage to the side of the case. so at first they said that the 5.38 gear set would not fit the spool, so they sold me a...

I have what I believe is a power lock carrier out of a dana 60. have any of you used one or know if they are worth using? I believe it is from a 1965 model (what seems to be a date stamp on the carrier) it has 4.10 gears and the pinion gear has a corse spline shaft.any info would be great. oh it...

hey Guys, I have finally put all the key parts together to assemble my 67 satty, please look over the list and give your opinions on it and what you think it may run. 1967 Plymouth satellite all steel std bore 440 zero deck KB piston's 10.6-1 comp(according to KB) std steel crank H beam rods(...

hey guys, I just bought a set of axles, spool, gears and a complete dana 60 housing( 1 ton) with a 4.10 sure grip carrier. I am not sure what width the rear end would be( I called mark williams and am still waiting for the specs). I do know that the axles measure 49.5" total length not...

I am building my 67 plymouth, the engine is as follows std bore 440, 10.8 to 1 CR 440 source stealth heads, (ported with mopar template and a flow bench, they are still at the machine shop so I do not have any flow numbers yet) comp 305H cam adjustable roller rockers(1.6). induction is eddy...

I have been thinking about building an NSS car out of my 67 satellite and was doing some reserch on the rules saying that I must use a carter AFB or Eddy carb is this correct? I currently have a 440 with 440 source heads. trans is still up in the air, would like to go 4 speed but don't have any...

I just picked up a set of 15x 3.5" weld drags stars and want to know know what size tire will fit? I am trying to stay budget minded, I work for a tire store but rather than trying to search inventory I thought I would ask you all first. will a 215 75 15 fit or will it be too tight. thanks...

I have a A833 O/D trans, and would like to use it in my 67 satellite with a 440. my question is how strong are they? will it live behind the big block?