Search results for query: *

Thank you for the update about the pinion depth. I'll check it all out. Thank you.

The noise goes away if I take my foot off the gas . I drive around town about 40 to 45 . Thanks for all the feedback.

Thank you for the info on the green bearings. I'll know next time..next time will be the correct bearings. The noise only comes at 40 mph, and stops at 45. No noise anytime before or after. The guy must of just set up the gears wrong. Now I have about 400 miles on that gear. I'll have to get a...

Bob it has a 8 3/4. No problems with the green bearings.

Bob, it's 8 3/4..No problems with green bearings

I will get the gears check out. Thanks Jeff

A guy here in FL who has 6 mopars told me that's he uses. Soy I listen to him.. Are green bearing BAD to use ? Thank you.

Thank you.

Thank you Jeff

Thank you for the tips. I just had new GREEN Bearings put in . Sounds like my gears are not set up right. ( Just had a guy put new gears in ) Could this be the problem ?

I have a 67 Coronet R/T 440, auto.At 40 MPH I have a noise coming from my rear end and at 45 it goes away. No noise before 40 MPH No noise after 45. Any help ? Thanks Jeff

I never new a starter would act like that. The cable is fine and does not get near the heat. I have stock exhaust not headers on my 528 Hemi

Ok I will set timing at 30 and see what I get. Right now when motor gets 180 and I turn it off it wants to keep running. and then when I try to start it is very slow to turn over. Hope this helps . Thank you for the help.

Thank you for the feed back. I will check the timing too. Jeff

Ok I will check it out. Thank you for the feed back.

Can any one tell me what the timing should be a stock 2008 528 hemi crate engine? It has a cross ram with 2 holley carbs just asking cause once I get my temp over 170 its very hard to start,like it turns over very slow and does not want to. Acts like its hot. Thanks Jeff

Thank you all for the Info.